Question about the Lens Correction tool
Hello!
I’m new to Capture One 10 for Sony, and have a question about the Lens Correction tool (I’m coming over from Lightroom).
Capture One automatically selects my lens, and ticks/applies “chromatic aberration†and “hide distorted areas†with all else set to “0%â€. Does this mean that although the profile for my lens was automatically selected and correcting for chromatic aberration, it has not applied correction to distortion, sharpness falloff or light fall off? To do so I would need to adjust these three to 100%? In fact they go up to 120%, whatever that means? The help file doesn’t answer that question.
Also, whilst I’m here, can I ask about sharpening and noise reduction. I’ve noticed the noise reduction slider for luminance, detail, and colour are always at 50. Is this an automatic correction and nothing else needs to be done? Same for sharpening, the amount is always 160, radius 1, threshold 1.
I’ve tried watching the tutorial videos and webinars and can’t find the answers to my questions.
Thanks.
I’m new to Capture One 10 for Sony, and have a question about the Lens Correction tool (I’m coming over from Lightroom).
Capture One automatically selects my lens, and ticks/applies “chromatic aberration†and “hide distorted areas†with all else set to “0%â€. Does this mean that although the profile for my lens was automatically selected and correcting for chromatic aberration, it has not applied correction to distortion, sharpness falloff or light fall off? To do so I would need to adjust these three to 100%? In fact they go up to 120%, whatever that means? The help file doesn’t answer that question.
Also, whilst I’m here, can I ask about sharpening and noise reduction. I’ve noticed the noise reduction slider for luminance, detail, and colour are always at 50. Is this an automatic correction and nothing else needs to be done? Same for sharpening, the amount is always 160, radius 1, threshold 1.
I’ve tried watching the tutorial videos and webinars and can’t find the answers to my questions.
Thanks.
0
-
Thanks for using CO!
If the lens is auto-detected, CO will only apply automatic distortion correction, if the distortion of the lens at the current focal length is over 1.5%.
Lightness and sharpness fall-off will never be auto-applied.
The noise/detail etc slider are always at 50, but underneath the values are hand-tweaked to the specific camera at the specific iso. The slider is left at 50 to give the user maximum adjustment latitude.0 -
Christian Gruner wrote:
Thanks for using CO!
If the lens is auto-detected, CO will only apply automatic distortion correction, if the distortion of the lens at the current focal length is over 1.5%.
Lightness and sharpness fall-off will never be auto-applied.
The noise/detail etc slider are always at 50, but underneath the values are hand-tweaked to the specific camera at the specific iso. The slider is left at 50 to give the user maximum adjustment latitude.
Hi, thanks for the reply.
Can i just clarify what i think i now understand:
Although distortion correction is only applied automatically if distortion is over 1.5%, am i right in assuming that setting the distortion slider myself to 100% is the way to remove all distortion, and in theory the same is true for any supported RAW image, from any camera/lens, at any focal length if i want all the distortion removed from that image?
P.s just for information, my lens is a Sony 50mm. I don't think there's much distortion from it, but i just want to understand the distortion slider for when i use other cameras and lenses.
Thanks0
Post ist für Kommentare geschlossen.
Kommentare
2 Kommentare