Tether can't change Fujifilm Camera Settings
I'm trying out Capture-One 20 and comparing it with Lightroom. Still running the Demo Licence. I'm using a Fujifilm XT-2, running the most recent firmware 4.32.
Capture One takes some time to recognize the connected camera.
Once recognized, changing any of the settings on the application side registers with the camera for a very brief second, then changes back to the initial setting. This happens when changing either the F-stop, Shutter speed, or ISO. Auto focus is also disabled.
Changing any of these settings on the camera side though works fine, with the application responding to any changes done on the camera.
I have none of these issues running Lightroom, so I know the camera is capable of full tether control.
In the preferences settings I only have the Fujifilm driver enabled, all others are disabled. can anyone help me?
Thanks
-
Same for me. I'm also on a Capture One Pro Demo license and using a Fujifilm X-T4. When you click on a setting, a scroll list appears and you can pick a different value from it. But right after that the previous setting comes back again so nothing changes in the camera.
0 -
I have the same problem with xt2. Help me please!
0 -
Same for XPRO2
0 -
When I set the shutter speed dial to T, I can change the shutter speed from Capture One.
0 -
Thanks Ewout , Will check this out....
0 -
Yes, changing the shutter speed dial to T fixed this for me. Thanks Ewout Vochteloo!
0 -
Put those settings, which you want control to C. If anything left in A or in a fixed value, it can't be controlled from the Tether. For the aperture most lenses have only A mark on the ring, but the meaning of this A can be changed to C in the menu. It is SET UP -> BUTTON/DIAL SETTING -> APERTURE RING SETTING (A) = Control in my XT-4.
0
Post ist für Kommentare geschlossen.
Kommentare
7 Kommentare