Does C1-5.1.2 support an Aptus II

Allan Schoening

• 16. September 2010 14:35

Hello everyone,

I have a Leaf Aptus-II on a Mamiya 645-AFD. When I connect to C1 it does not fire. The only error message I get if from the camera's interface which says, "no db"

I've downloaded the leaf driver and have set the leaf-configuration preference in capture to "large format" as instructed. Any thoughts? Thank you.

0

• 

  Paul Steunebrink

  • 16. September 2010 15:48

  According to the release notes (in the Help menu) miscellaneous Aptus II models are supported for tethering in Pro/DB of CO 5.1.2. I do not understand what you mean with 'downloaded the Leaf driver'. If it still does not connect I suggest you to contact your dealer or open a support case.

  0
• 

  Allan Schoening

  • 17. September 2010 19:15

  In C1, if you want to connect with a leaf back you have to install the leaf driver. In the menu bar go to, Capture One...Install Leaf Driver. It's very simple and silly but unfortunately necessary.
  
  Here is the trouble shooting article I found on C1's website: http://www.phaseone.com/en/search/artic ... nguageid=1

  0
• 

  Paul Steunebrink

  • 18. September 2010 06:44

  Thanks for the heads up. I was aware of the issue with the Windows version due to a message during installation of CO5 but had not ran into it with the Mac version (I don't have a Leaf back, which explains a lot).
  
  Have you selected another camera type in the Preferences? Large Format does not seem to be the correct choice for your setup (the article does not say you have to select Large Format). I would suggest Mamiya 645 AFD for a change but your dealer or Phase One support can help you better I think.

  0

Post ist für Kommentare geschlossen.