Rotation / Orientation of image using 1DSMK3
How can I preset the orientation of each incoming image .
Did a still life today shooting straight down onto floor.
The was camera was set up so each image arrived upside down and I had to rotate it by hand each time .
Have not worked out how to preset the image orientation so it get automatically applied to each incoming image.
That used to be really easy in 3.xx
Please help.Thanks
❓
I appreachiate the new software, but the CO4.xx US was changed a lot compared to 3.xx, maybe too much, too quickly, quite disorientating at times.
Did a still life today shooting straight down onto floor.
The was camera was set up so each image arrived upside down and I had to rotate it by hand each time .
Have not worked out how to preset the image orientation so it get automatically applied to each incoming image.
That used to be really easy in 3.xx
Please help.Thanks
❓
I appreachiate the new software, but the CO4.xx US was changed a lot compared to 3.xx, maybe too much, too quickly, quite disorientating at times.
0
-
Maybe switch off autorotate in the camera? 0 -
autorotate switched off, still looking for button to permanently change image rotation.
Under 3.7 it was under Camera > Setting . . .> Capture orientation > landscape -180degrees . . . . . easy
I am trying to get it working in the adjustment panel ticking Rotation button,
but don't know where to set the rotation and haven't work out how to apply it automatically.0
Post ist für Kommentare geschlossen.
Kommentare
2 Kommentare