Set as capture white balance while tethered

cf1

• 30. September 2006 16:27

I am shooting with a tethered 5d, and when I change the ICC profile in the White Balance tool, and then click the Set as capture white balance button, the change is not made in the capture tool icc profile setting. The captures continue to hold the previous profile setting. My understanding is that I make the setting changes in the white balance tool, click Set as capture white balance (camera icon) and then the captures will take the new white balance settings. Any suggestions or corrections to my process?

Thanks,

Christopher

0

• 

  Greg Scheidemann

  • 1. Oktober 2006 20:56

  The camera profile is set in the camera tab. If you set it there, it will be set for all further incoming captures.
  
  You can change the camera profile in either tab, but in the white balance tab, it is only on that capture, as you've seen.
  
  greg

  0
• 

  Eric211

  • 2. Oktober 2006 00:20

  I usually shoot one picture and then tweak it. After that usually all the pictures incoming after tweaking are the same as the last tweaked version..
  Correct me if I am wrong but I do not think you have to push any button. Click the capture Button is just telling the program where to store the pictutres RE: Capture folder.
  🤓
  *EK

  0
• 

  Greg Scheidemann

  • 2. Oktober 2006 16:30

  I'm referring to the tools: The Organize tool, Capture tool, White Balance tool, Exposure tool, Focus tool, Process tool, and Batch tool.
  
  In the Capture tool (the camera icon) you can adjust the way C1 adjusts incoming captures. I have the Settings dropdown menu set to 'inherit from last capture'. That way, the levels, curves and white balance info from the last capture will automatically be applied to the next one. However, ICC profiles aren't copied with this setting, but you can set the ICC profile for incoming shots on this Capture menu too. It is the fifth and last setting. You can set the ICC profile and it will hold for the incoming captures. If you change it at any time, the subsequent captures will also have that ICC profile.
  
  
  I hope that clears it up.
  
  greg

  0
• 

  Kevin Wilson

  • 22. März 2007 13:54

  Greg, is this for PC or Mac, my white balance is coming in as Standard on all captures - how can I set this to my Custom studio WB as default?

  0
• 

  Greg Scheidemann

  • 22. März 2007 14:42

  this is for mac. You set the White Balance in the White Balance Tool, then click the small camera icon, and it will set that white balance for the incoming captures, when tethered.
  
  greg

  0

Post ist für Kommentare geschlossen.