Zum Hauptinhalt gehen

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Crop tool not really usable in 6.0

Horst Schmier
I´m testing 6.01 on a win 7 64 bit machine in pro and express mode.
The good message is: Open CL is now available (graca hd 5770, Catalyst 12)
The bad message is: The crop tool isn´t working quite normal,
cos there is a big problem to move the "frame".
Moving the frame is nearly impossible or sometimes for just some mm.
It doesn´t work in both versions (pro and express).
On the other hand, if I release the crop by digits, only the frame is visible,
but not the whole picture. Changing another picture and coming back to the
cropped version resolves the problem.

As I´m working very often with crops, 6.01 is not working for me
and I have still to use 5.0

Any others with the same problem and perhaps there is a solution?
0

Kommentare

6 Kommentare

Datum Stimmen
  • Permanently deleted user
    I am running the COP 6.0.1 on the 64-bit Windows 7 with an ATI 5770 based video card. The Open CL option is enabled.

    I do not see the problem you described. The crop tool is working for me. Can you give us a step by step recreate scenario? You could also record what you experience with a screen recording program such as the FastStone Capture (30 day trial).

    On the other hand, I have discovered some screen redraw issues with Open CL enabled.

    viewtopic.php?f=41&t=9775
    0
  • Drew Altdo
    [quote="Horst121" wrote:
    The crop tool isn´t working quite normal,
    cos there is a big problem to move the "frame".
    Moving the frame is nearly impossible or sometimes for just some mm.


    This can be a conflict between the given Crop and the Rotation or Keystone applied to the image. Trying to move the frame is not possible if you are trying to move it into a space restricted area of the image. Doublecheck to make sure the edge of the crop isn't hitting a side of the image that is anything other than completely straight.
    0
  • Horst Schmier
    I´m using now C1 since 4.0 and am familiar with all the features of the crop tool.

    The prob is still that I cannot move the cropped frames in some pictures. Today I have tried to move frames, cropped by C1 5.0. Strangely it works with some smaller crops, unfortunately it doesn´t work with wider crops. When I try to move these crops it works for some mm. Then I have to release the mouse, have to click again and it works for some other mm. For me it looks like a memory error. Same effect with or without OpenCL.
    0
  • jonpaul
    Hello I have a slightly different issue:

    The crop works but is restricted to an aspect ratio or size, usually I can get full height but never able to adjust width beyond a limit. ☹️

    I tried all the selections in the Crop Tool adjustments, and have selected ratio unconstrained.

    But sometimes it works normally!

    Why?

    Many thanks,

    Jon
    0
  • Paul Steunebrink
    [quote="jonpaul" wrote:
    The crop works but is restricted to an aspect ratio or size, usually I can get full height but never able to adjust width beyond a limit. ☹️

    I tried all the selections in the Crop Tool adjustments, and have selected ratio unconstrained.

    This could be a result of the constraint. When you enlarge the crop, one side or corner can hit a side of the image. This can happen in particular when you have also rotated a few degrees to straiten the horizon for example. Move the crop a bit away from the side, and you can continue to enlarge the crop.
    0
  • Vesa_Ekholm
    [quote="Horst121" wrote:
    Moving the frame is nearly impossible or sometimes for just some mm.
    It doesn´t work in both versions (pro and express).
    On the other hand, if I release the crop by digits, only the frame is visible,
    but not the whole picture. Changing another picture and coming back to the
    cropped version resolves the problem.


    Same thing here...
    0

Post ist für Kommentare geschlossen.