Zum Hauptinhalt gehen

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

C1 9.2 Conversion Noise

MHK
Just simple conversion from ARW to JPG. When I tried to convert, half of them are noisy just the one on left hand side. Half of them are clean just like on right hand side. Why Do I have this noise?

https://c7.staticflickr.com/6/5792/31005799542_e90edb8660_b.jpg
0

Kommentare

6 Kommentare

Datum Stimmen
  • Christian Gruner
    Please update to 9.3.0. If the problem is still there, please contact our Support Team.
    0
  • John Doe
    I would also try to export with OpenCL set to Never, just in case.
    0
  • MHK
    [quote="John Doe" wrote:
    I would also try to export with OpenCL set to Never, just in case.

    Without setting anything, I don't see any noise. With any changes such as clarity, exposure, I see that noise.
    0
  • John Doe
    Is OpenCL set to Auto or Never?
    0
  • Christian Gruner
    Please update to 9.3.0 before trying to set to never. Many bugs are being fixed from release to release. If you still see problems, contact our Support Team, at they can have you try a few more things.

    Setting the Hardware Accelleration to Never is a last resort, as it greatly affects performance.
    0
  • MHK
    [quote="Christian Gruner" wrote:
    Please update to 9.3.0 before trying to set to never. Many bugs are being fixed from release to release. If you still see problems, contact our Support Team, at they can have you try a few more things.

    Setting the Hardware Accelleration to Never is a last resort, as it greatly affects performance.


    Will try 9.3.
    0

Post ist für Kommentare geschlossen.