Lens Color Case and RAW Converter

spassig

• 9. März 2014 08:07

Hi forum

A colleague say.

The new software C1 removed the lens color case automatic.
Does it works without C1 know which lens is mounted on the body?

For example, I will work with Zeiss Distagon 4/40 on Hasselblad 503 CX and PO45.

Regards

Jochen

0

• 

  Paul Steunebrink

  • 10. März 2014 17:05

  When lens information is stored as metadata in the image file, lens correction can take place automatically by CO7.
  CO7 does have a lens profile for the Carl Zeiss Distagon T* 4/40 IF CFE.
  
  However, the Hss 503CX will not transfer lens information into the Phase One back. As a result the required metadata is missing and you will have to manually select the profile. You can copy/apply that setting to a selection (or all) of you images in a session folder or catalog collection.

  0
• 

  spassig

  • 10. März 2014 17:58

  Thanks for feedback
  

  [quote="Paul_Steunebrink" wrote:
  
  When lens information is stored as metadata in the image file, lens correction can take place automatically by CO7.
  CO7 does have a lens profile for the Carl Zeiss Distagon T* 4/40 IF CFE.
  

  
  
  😉
  
  

  [quote="Paul_Steunebrink" wrote:
  
  However, the Hss 503CX will not transfer lens information into the Phase One back. As a result the required metadata is missing and you will have to manually select the profile. You can copy/apply that setting to a selection (or all) of you images in a session folder or catalog collection.
  

  
  
  Tomorrow I get my second hand P45 😄
  Today I make some shots with my three lenses:
  Carl Zeiss Distagon T* 4/40 CF
  Carl Zeiss Planar T* 2.8/80 CF
  Carl Zeiss Sonnar T* 4/150 CF
  
  In C1V7 Objektiv Profil I see following.
  Carl Zeiss Distagon T* 4/40 IF CFE
  Carl Zeiss Distagon T* 2.8/80 CF
  4/150 is missing.
  Why?
  
  Is it so good that a correction is not necessary?
  
  Regards
  
  Jochen

  0

Post ist für Kommentare geschlossen.