Zum Hauptinhalt gehen

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Crashing all the time!

Frances1
Hi,

i am using Capture One Pro V.3.7.7 and an iMac OS 10.4.7 with 240gb (114gb used and 117 gb free).

When I use Capture One Pro, it is fine to start with as long as there is nothing in either the Captured/Processed files. Then as it fills up, it just crashes every time.

If I empty everything first, it usually behaves but can crash if you go into the "Processed" file (which is empty). I am not sure what to do.

So far, I have:-

Reinstalled software
Onyx clean-up
repaired disk permissions

Can't think of anything else.

Any ideas, anyone! This app cost alot of money and I am beginning to think it is not "fit for the purpose".

Thanks
Frances
0

Kommentare

6 Kommentare

Datum Stimmen
  • Robert5
    Two suggestions:

    1) Update your OS to 10.4.11 (the most recent version)

    2) Trash your preferences file (user -> library -> preferences -> com.phaseone.application.captureonedslr.plist). This resets the software to factory defaults.

    WARNING WARNING WARNING -

    Removing the .plist file will reset your toolbar, any custom processing setups (ie - it will reset to "high quality" and "quickproof"), and you will have to re-add any sessions. (Settings for files in individual sessions will be retained). But this is an oft-used trick when the program develops "glitches" similar to what you speak of.

    There are also several other .plists which can corrupt (Knowledge Base article 1589). White balance, LCC files, styles, and any other "saved" preset can also corrupt; think back as to whether this problem developed right after saving any such file. But most likely, one of the two suggestions at the top will work.

    ~Rob
    0
  • Frances1
    Thanks - tried all that - still crashing. Not sure what to try next.

    Fx
    0
  • Anonymous
    Hi -
    First try this uninstall: http://www.phaseone.com/HOME/Content/Su ... 20-%20Main
    Then get yourself a new download - ( 3.78 is available now ) make sure your RAW file is supported and install. Create your process folder in the default location of User> Pictures. Bring in a new set of captures ( not the previous ) and try processing. If you still crash please create a support case, let us know if here is a specific error prior to crashing. you may want to attach a crash log and a RAW file to the case; http://www.phaseone.com/HOME/Content/Su ... 20-%20Main
    create a support case:
    http://www.phaseone.com/HOME/Content/Su ... 20-%20Main

    Kind regards-
    JRA
    Phase One Support
    0
  • Frances1
    Thank you, JRA.

    I have contacted support and we are now working through the problems.

    One thing, however, is that this newer version says it supports my Canon Mark III EOS 1D but when I attached it to the 3.7.8 app to upload some photos, it said "Connection failed, Error: 0c000080". Do you know what that means. I thought that this newer version now supported my camera.

    Thanks
    Francesx
    0
  • eerdepeer
    [quote="Frances144" wrote:
    Thank you, JRA.

    I have contacted support and we are now working through the problems.

    One thing, however, is that this newer version says it supports my Canon Mark III EOS 1D but when I attached it to the 3.7.8 app to upload some photos, it said "Connection failed, Error: 0c000080". Do you know what that means. I thought that this newer version now supported my camera.

    Thanks
    Francesx


    Hi there,

    It seems that I have the same problem over here. With a Canon 350d with firmware 1.0.3 (Rebel XT outside Europe)

    I tried: [...deleting a lot of text]

    All of this has not worked for me.

    BUT !!!!!!!!!

    I found out what the problem is!!!! 😄

    You have to change a setting in your camera's menu. There is a setting called "communications". Change the Print / PTP connection to PC Connection. That's it!

    Regards
    0
  • Paul Steunebrink
    [quote="eerdepeer" wrote:
    [quote="Frances144" wrote:
    [...]
    One thing, however, is that this newer version says it supports my Canon Mark III EOS 1D but when I attached it to the 3.7.8 app to upload some photos, it said "Connection failed, Error: 0c000080".


    [...]
    With a Canon 350d with firmware 1.0.3 (Rebel XT outside Europe)
    [...]
    There is a setting called "communications". Change the Print / PTP connection to PC Connection.

    Well done, but for Frances144 the problem is slightly different. The EOS-1D Mk III is not supported for tethering at all in CO 3.7.8 Pro. It is in de release notes.
    0

Post ist für Kommentare geschlossen.