CO 6.1.1 does not use the option "Embedded Camera profile"?

Michael Mährlein

• 17. Februar 2011 20:08

Hello,
I installed CO 6.1.1 and developed an image. If I want to export the picture with an embedded Camera Profile (for a Phase One P40+), Photoshop CS5 opens it with sRGB profile, because this profile is embedded. I already tried it with another ICC Profile (Outdoor Daylight, Flash, ...) with no success. Because that's my default setting, I know that it works fine in earlier versions.
Does anybody have the same problem? can somebody check it please?

Best regards,
Michael

PS: If I export it with eciRGB it works fine.

0

• 

  Michael Mährlein

  • 17. Februar 2011 20:17

  ... now I reseted the image and it works again! ❓
  
  Does anybody makes the same observation?
  
  Best regards, Michael

  0
• 

  Paul Steunebrink

  • 17. Februar 2011 20:20

  In case of any doubt, delete your process recipe and create a new one from scratch.

  0
• 

  Michael Mährlein

  • 17. Februar 2011 20:22

  I think that is the problem. Thanks for your tip.

  0
• 

  Michael Mährlein

  • 17. Februar 2011 20:47

  Now I found the problem ... and the solution.
  If I use an additional layer and export the the file with embedded camera profile, CO attached the sRGB profile. If I switch off all additional layers and export, the correct icc profile is embedded. Grrrrr -> therefore the "new" function "layers" are not useable.
  Can somebody test this problem on his machine?
  Best regards, Michael

  0
• 

  Paul Steunebrink

  • 17. Februar 2011 20:57

  Can't reproduce the error. Always embeds camera profile.
  
  P40+ image, CO Pro 6.1.1, 1 local adj. layer, tiff 8- or 16-bit, embed camera profile, open with CS5, OS X 10.5.8.

  0
• 

  Michael Mährlein

  • 17. Februar 2011 21:27

  Thanks for testing! Now I deleted the receipt and I have made a new one. The result is the same. If I switch off the layer the camera profile is embedded, if I switch it on the profile is not embedded.
  Now I opened a support case.
  Best regards, Michael

  0
• 

  thowi

  • 17. Februar 2011 21:53

  yes, it happens when you add a layer with color edits.
  It's not a bug and it is there since layers were introduced.
  Color edits in the color editor physically alter the camera profile. So you have one camera profile on the background layer and another camera profile on the upper layer ... and there is no way to merge the two profiles into one.
  If you want to use color edits on layers you have to set a different color profile as output recipe (ProPhotoRGB or whatever you prefer).

  0
• 

  Paul Steunebrink

  • 17. Februar 2011 22:07

  Makes sense, thanks for explaining.

  0
• 

  Michael Mährlein

  • 17. Februar 2011 22:13

  Thanks for explantation. The support confirmed it.
  Best regards, Michael

  0

Post ist für Kommentare geschlossen.