Printing from Capture One
Jsem s CO maximálnÄ› spokojen, verze 5.1 je opravdu povedená 😄 , hlavnÄ› na w7 funguje výbornÄ›. ChtÄ›l jsem se zeptat, zda bude nÄ›kdy možnost pÅ™Ãmého tisku z RAW, aniž by se pÅ™edem musel provádÄ›t export do nastaveného formátu. Nemohl by se výpoÄet exportu vytvoÅ™it pouze virtuálnÄ› a pak rovnou spustit tisk? UrÄitÄ› by to urychlilo práci, hlavnÄ› v pÅ™ÃpadÄ›, že nenà nutné mÃt soubor který se tiskne nikde na disku, otevÃrat dalÅ¡Ã program, ze kterého by se to teprve tisklo. Snad mi rozumÃte.
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter
0
-
Peter,
If you're looking to contact a specific supporter it is better done through a support case, not the forum.
Please create a support case:
http://xchange.phaseone.com/content/sup ... nguageid=10 -
Jsem s CO maximálnÄ› spokojen, verze 5.1 je opravdu povedená 😄 , hlavnÄ› na w7 funguje výbornÄ›. ChtÄ›l jsem se zeptat, zda bude nÄ›kdy možnost pÅ™Ãmého tisku z RAW, aniž by se pÅ™edem musel provádÄ›t export do nastaveného formátu. Nemohl by se výpoÄet exportu vytvoÅ™it pouze virtuálnÄ› a pak rovnou spustit tisk? UrÄitÄ› by to urychlilo práci, hlavnÄ› v pÅ™ÃpadÄ›, že nenà nutné mÃt soubor který se tiskne nikde na disku, otevÃrat dalÅ¡Ã program, ze kterého by se to teprve tisklo. Snad mi rozumÃte.
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter0 -
Peter,
If you wanted you could likely just have a Hot Folder for your Printer to watch. Then Process direct to that folder and the images should go straight to your printer, no other software required.0
Post ist für Kommentare geschlossen.
Kommentare
3 Kommentare