Trouble using the layer tool

Steve Tompsett

• 8. März 2013 22:42

Hi to all

Im having a few issues using the layer tool in capture on 7.02....at first it will work fine..then out of the blue when I right click the mouse to apply the layer..the image goes black and I cant see what Im doing...just the image not the whole screen...it also goes black when erasing the layer

my pc is a I5 750 running at 2.66ghz, 16 gig ram , 64 bit windows 7 and a Nvidia 250 GTX video card with 1 gig of ram...

im thinking the video card is my weak link...but any other settings you guys know of..please let me know .

0

• 

  Steve Tompsett

  • 8. März 2013 22:56

  ok..I sorted it out myself.. I've now turned open gl to never in both display and processing..it was already off in processing as I was getting black Jpegs if open GL were left to auto
  
  so how do you get open GL to work..I take it the processing is faster if you can use it...does anybody have a PC where they are using open GL ?..is my video card the issue ??
  
  cheers for any replies

  0
• 

  Luke Miller

  • 10. März 2013 16:55

  Here is the link to the compatible graphics cards.
  
  http://www.phaseone.com/Search/Article. ... nguageID=1
  
  I'm using a GTX570 with good results.

  0
• 

  Steve Tompsett

  • 10. März 2013 21:52

  Thanks Luke
  
  are you using open GL in processing and display..what are the other specs of your PC..
  
  cheers
  steve

  0
• 

  Steve Tompsett

  • 10. März 2013 21:57

  I had a look at the list my GTS 250 is there...but open GL for me is unusable

  0
• 

  Jim MSP

  • 10. März 2013 23:05

  [quote="Tommo1965" wrote:
  I had a look at the list my GTS 250 is there...but open GL for me is unusable

  
  
  Be sure you have the latest drivers for it.

  0
• 

  Steve Tompsett

  • 10. März 2013 23:28

  Yes jim..I have the lastest drivers. ....314.14

  0
• 

  NN634708402639857718UL

  • 11. März 2013 00:15

  Just my opinion/comment.
  Open CL is a moving target. With drivers being just a part of the mix. One can have a "supported" card that works and another brand of card using the same chipset may not work at all. Even the motherboard used can have a good or bad influence.
  Yet another example of the kinds of problems that an "OPEN" architecture can have on ones life. (Remember the early DNG claims. Lots of parallels there.) Until there is some kind of consensus locking implementation use by the openCL group it will always have various problems.

  0
• 

  Luke Miller

  • 11. März 2013 18:43

  [quote="Tommo1965" wrote:
  Thanks Luke
  
  are you using open GL in processing and display..what are the other specs of your PC..
  
  cheers
  steve

  
  
  Steve
  
  Using Open CL for both. System is i7 960 CPU (3.2 GHz) and 12 GB RAM. EGVA motherboard with Intel chipset.

  0
• 

  Steve Tompsett

  • 11. März 2013 21:10

  Thanks Luke ..Ill might try a video card update..see if that fixes things

  0

Post ist für Kommentare geschlossen.