Zum Hauptinhalt gehen

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Grid image Position / usb3-ssd difference

Kommentare

2 Kommentare

  • SFA
    Jose

    For your question 1), yes it is a little strange but there are situations where knowing where to go back to might be difficult.

    For example sort order the display by star rating and change the rating .... where to go back to?

    People may have many different opinions if asked.

    If you have the browser active and use the left or right arrow keys I would expect that to put you back at the image just after or just before the one you were working on in the viewer. So Left then right arrow should be a quick way to get back to the same image in the browser so long as any filtering in use does not exclude it.

    For Q2, I use Windows so cannot really offer an opinion.

    Yes an internal SSD is good.

    I have 2, one running at SATA 3 and one at SATA 2 maximum speed. In general I see no obvious speed differential working on sessions form either drive. (My file sizes are not often very large - I use older cameras.)

    I can also run on an external USB3 drive which is slower but not unusably slower unless it has dropped into low power mode and needs to be "woken up". Not so good if used with a cable over 2 metres long.

    An external USB3 drive connected on a USB2 port is slower but, surprisingly, not terrible depending on how the workflow is applied and therefore how much processing you are asking C1 to do.

    That's using Windows 7 on a 4 years old notebook (i7 processor) .

    I cannot offer any advice specifically for Macs.


    HTH.


    Grant
    0
  • Sagitario1964
    Thank you SFA.
    Your solution is not bad but I guess it should be done automatically 😉
    Kind regards
    0

Post ist für Kommentare geschlossen.