re-sizing an image.

FirstName LastName

• 9. September 2020 18:23

How do I resize an image from 20"x13" down to 5.5 x 3.5 for printing on a sheet of 6" x 4" paper?

I want to print the whole image not a crop. 

0

• 

  SFA

  • 9. September 2020 19:55

  Assuming you are not using an "Express" version the simplest way is to create an Output Recipe specifying the output requirements and letting C1 do the rest.

  If you are printing directly you also need to specify the final output size in the print functionality.

  You will likely need to do a little cropping to adjust for the small change in the ratio of the two sizes - or accept a slightly different margin on either the long or the short side.

  0
• 

  FirstName LastName

  • 9. September 2020 21:30

  I am using Nikon Express..does that make a difference?

  0
• 

  SFA

  • 9. September 2020 21:57

  I think you are therefore constrained to the "Export" option. No Output Process Recipes in Express for Sony or Fuji so I assume it's the same for Nikon.

  Recipes would make things easier  - assuming you are producing a file from which to print 6x4 and you may have different size requirements that you use regularly.

  (And of course there are other features available in the full versions.)

  I'm not sure about Printing. But in any case if printing directly out of C1 then you have the tools that are available via the print module and the driver for your printer(s)

  0
• 

  FirstName LastName

  • 10. September 2020 03:10

  Thanks for replying SFA, I will continue to use PS for my printing.

  0

Post ist für Kommentare geschlossen.