How to print borderless?
I'm trying to print borderless on a custom paper size (12"x12"), and I can't get rid of the border. The image is a square one (taken with an astro camera), and I've set up a custom paper size of 12"x12". In the print dialog I choose that paper, set rows and columns to 1, cell height and width to 12", cell border to 0, and all margins to 0. Looks fine in the print dialog, but when I print, I get a 1/4" border. Although it looks fine in the print dialog, if I check Print Preview (in the Print Settings -> Printer Settings dialog), it does show a margin. I can print borderless using a paper selection of 11x14 (Sheet Borderless...), but I can't get the 12x12 custom paper size to print b15.2.0.77orderless. This is on an Epson P900, Mac OSX 12.3.1, Capture One 15.2.0.77.
Any ideas of to get C1 to print borderless on 12x12 paper>?
-
Is your 12x12 custom size set to Borderless? It sounds like C1, or perhaps the P900, is assuming that the paper has a border. I think you can specify the paper’s actual print area in the print dialog rather than C1’s print settings.
0 -
I don't see any way to set the custom size to borderless. I did set the margins in the custom size dialog to 0, but that apparently doesn't do what's needed. Probably some sort of issue with the Epson driver, so I may send a support request to them. Not holding my breath for a meaningful response, of course...
0 -
Have a look at this:
Here's Epson's intruction:
https://files.support.epson.com/htmldocs/r2400_/r2400_rf/other_11.htm
And although this one's for InDesign, it may help you:
Let me know if either of these work for you.
0 -
Good suggestions, but as I indicated in my original post, I've done all that already (hence my query to this forum). Most of the URLs reference older versions of OSX, so it may be a newer Epson driver that is causing the problem. The Red River web site also has similar (and outdated) instructions, but they do specifically mention the P900 and the 12x12 paper that I purchased through them for borderless printing, so their support folks may be able to give some pointers.
0 -
It turns out that the information on the Red River paper web site that says a 12x12 custom paper size will print borderless on an Epson P900 (https://www.redrivercatalog.com/infocenter/tips/limited-custom-borderless-epson-printers.html#mac) is incorrect. Unfortunately, that size is not supported by the P900 for borderless printing. Ah well, live and learn (and be careful with info on the Red River web site!).
0
Post ist für Kommentare geschlossen.
Kommentare
5 Kommentare