Bram Vreven
- Gesamtaktivitäten 10
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 2
Aktivitätsübersicht
Neueste Aktivität von Bram Vreven-
Bram Vreven hat einen Kommentar hinterlassen
I exported a tiff, and imported it in C1. All curves are flat in my case. It is not clear to me how therecan be control-points in the curve of an imported TIFF anyway. Does C1 defines these curve-p...
-
Bram Vreven hat einen Kommentar hinterlassen
Dear GB, Thank`s again. I`ll check Fredmiranda. I also submited a CaptureOne-support-ticket on this issue, as I find itvery difficult to deal with this channel behaviouir. If this leads to a soluti...
-
Bram Vreven hat einen Kommentar hinterlassen
Dear GB, Thanks again. Here are the values, see also the screenshot. In C1, Recipe Proofing is off and No Profile is selected in the Menu View/Proof Proflile. Both exports are PSD`s, 16bit, ProPhot...
-
Bram Vreven hat einen Kommentar hinterlassen
Dear GB,I also saw this vertical movement. But if you put one or more color readouts in the image viewer, you will see that the R and G stay stable when B is changed as long as Recipe Proofing is n...
-
Bram Vreven hat einen Kommentar hinterlassen
Dear Dave, Thank you for the explanation and the diagram. Unfortunatly it does not solve my problem, but I did learn something important about C1. It turns out that there are two kinds of "proofing...
-
Bram Vreven hat einen Kommentar hinterlassen
Dear Dave, Thank you for diving into this. Unfortunatly the problem persists. I had no proofing on when doingthe tests. I nevertheless changed it`s setting to "No proof profile" to be sure, and the...
-
Bram Vreven hat einen Kommentar hinterlassen
Thank you for the confirmation of the observation that the channels are not independent in C1.This can also be observed when using the levels tool for example. Whenever you touch somethingon the R,...
-
Bram Vreven hat einen Post erstellt
RGB Curves / Less blue results in a green cast instead of a yelow cast?
Dear All, Every time I try to chance color by adjusting the individual color curves, I strugle to get the right results. Now, today I tryed out some extreme settings. I did this in both Capture one...