Thomas D.
- Gesamtaktivitäten 203
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 16
- Abonnements 51
Kommentare
Neueste Aktivität von Thomas D.-
Well sure - to a point. If the software is querying or managing memory poorly you can throw new faster hardware at the problem and it will help but in the end the software is still not living up t...
-
Capture One does not write the adjustments to the hard disk.If an Out of Memory message is displayed, all copied adjustments will be lost, even if the status bar is above 50%.From this I conclude t...
-
@ClauSUpdate to my case. Ram usage remains at 14 GB while Exporting.--------PC Consideration:My Girlfriend has a Photostudio, her PC, almost the same as mine (See Signature), uses allways 30 GB of ...
-
I'm currently working on limiting the style to two layers but achieving the same.At the moment it looks even better.Unfortunately less planes scale badly, if the light conditions change you have to...
-
Hi,I will go with Threadripper.As shown today 7900X (10 Core) is a no go.My CPU 3930K (4.2 ghz, Consumes up to 220 Watts OCed)I use two W8100 Workstation GPUs <--- Professional Drivers, Consumer Dr...
-
"4. This is more of a suggestion - I LOVE your color balance tool! Don;t change this 😊 But is there would be another tool like Split Toning in lightroom (with more intense layer of colour) - it wou...
-
Hi,so far i know while generating Previews GPU is not in use.With CO 10 it is easier to tell if OpenCl is working, you will find it in the Prefences.It could be that CO 9 is not Optimised for Ryzen...
-
I didn't expect that the Luminance Masking has such a big impact to my work.I would wish that CO did use the GPU far more, cause GPUs are much more powerful.But it's GPGPU Processing and the GPU do...
-
@ C-M-BYour Problem is the Same.Techgage did Bench Capture One an had the same Issue with a 32 Core Threadripper CPU, the 32 Core did have the Same Performance as a 9900K 8 core 5 ghz Cpu.So they h...
-
Hi,CO 10.1.1 Causes Bluescreen on my Machine, so i went back to 10.1.So, back to Topic.Little workaround for HW-Acceleration.Start Capture One --> Disable HW-Acceleration --> Close Capture One --> ...