Steve 3

  • Gesamtaktivitäten 14
  • Letzte Aktivität
  • Mitglied seit
  • Folge ich 0 Benutzer
  • Gefolgt von 0 Benutzer
  • Stimmen 0
  • Abonnements 4

Aktivitätsübersicht

Neueste Aktivität von Steve 3

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Photography talk
    3. Nikon D610 tethered

    Hi,Your workaround --based on years ago info to get a nikon D2x to tether will not work. The camera control bundles I can not find in nikons current software. Please try it for us working pros who...

  • Steve 3 hat einen Post erstellt

    Capture pilot to Ipad To large monitor?

    1. Community
    2. Open Archive

    Can I show images on a 52in. TV through capture pilot? Will airplay from Ipad go to a TV with Apple TV? How can I display Fashion image captures on a large screen as I shoot them? I shoot tether...

    • Steve 3
    • 3 Follower
    • 3 Kommentare
    • 0 Stimmen

  • Steve 3 hat einen Post erstellt

    D800 Tethered,distortion control......

    1. Community
    2. Open Archive

    Thank you for the information about shooting tethered with the D800. We have successfully connected. However; when I shoot jpeg and Nef (raw) with the camera switched to distortion control 'on', ...

    • Steve 3
    • 0 Follower
    • 0 Kommentare
    • 0 Stimmen

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Open Archive
    3. EmptyName

    How can we 'lock-in' the image name setting in V6 ? Resetting the image name every time you start the software or create a new session is a step backwards. Previous versions of Capture One did not ...

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Open Archive
    3. Error E00002Bd

    Apple has diagnosed this problem for me, it turns out to be a firewire handshaking error within CaptureOne. Apparently the new Intel Imac is not fully supported by 3.7.3

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Open Archive
    3. New Imacs

    Inspite of the posted technical bulletin stating that the software runs fine under Rosetta, you cannot capture via firewire because of an issue with CaptureOne firewire handshaking.We were told by ...

  • Steve 3 hat einen Post erstellt

    Has anyone?

    1. Community
    2. Open Archive

    Has anyone managed to get a new Intel Imac to recognize an H25 or H20? CaptureOne works fine otherwise, but gives me an error everytime I connect a camera to it.

    • Steve 3
    • 0 Follower
    • 0 Kommentare
    • 0 Stimmen

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Open Archive
    3. Error E00002Bd

    [quote="Keith Carpenter" wrote: Steve,curious if you have an EyeSight on that iMac ?To the best of my knowledge, thats the only way they come. Isight is built in on the newer Imac.

  • Steve 3 hat einen Kommentar hinterlassen

    1. Community
    2. Open Archive
    3. Error E00002Bd

    The machine is a Intel Imac.I have the cameras attached through a powered 1394 hub as was discussed in another thread.The green lights on the back come on when plugged to the 1394. The phase one so...

  • Steve 3 hat einen Post erstellt

    Error E00002Bd

    1. Community
    2. Open Archive

    Capture One keeps giving this error when I connect my H20 and H25. Whats the dealio?Steve Smith

    • Steve 3
    • 2 Follower
    • 6 Kommentare
    • 0 Stimmen