Bill_H
- Gesamtaktivitäten 26
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 8
Kommentare
Neueste Aktivität von Bill_H-
John, you solved it! Thanks, I'll fill out an updated support case and send it to Capture One, they will be thrilled to know the 'solution'.I just re-shot the grey-card/white-card again and with t...
-
Rob, he's asking about the 1Ds, not the 1D ... also, the black line is not the 'only hitch' with the 1D M III, the exposure is off, underexposed by about 1.2 stops.
-
We are using both 3.7.7 and 4.0 and there are no problems.
-
lpcd2001, C1 3.7.7 works with the 1D M III except for these two things: 1) the High Tone Priority custom function is not recognized, and 2) there's a small strip of garbage pixels left at the botto...
-
Just to update this in case other 1D Mark III users have this problem, apparently the problem occurs if you set Custom Function II-3 (Highlight Tone Priority) since COne doesn't recognize this CF a...
-
I feel your pain ... I also have the 1D Mark III ... LE 3.7.7 WILL open the M III files and there's a profile for the camera, but all the exposures are too dark by about 1.2 stops and when you fill...
-
"at the very least I've been finding their customer service to be pretty good"Banzai, this is a professional grade camera that has been out since last April ... I sent in a bug report about the exp...
-
To add to my own post here's a link to an example showing the exposure problem ... this was for 4.0b2 but I see the same with 3.7.7 ... I put this up to show the C1 guys the problem when I filled o...
-
Rob wrote "I haven't notices any issue with exposure."I see the opposite, every image shot with the 1D Mark III is underexposed by more than one stop when converted with Capture One, but ok with Ph...
-
banzai, I filed a support case and they replied that there is indeed a problem with the 1D M III conversions. I posted their answer below -- if I understand it correctly he says the M III will be...