jonpaul
- Gesamtaktivitäten 93
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 29
Kommentare
Neueste Aktivität von jonpaul-
Hi there: Did you turn off any programs and services running in the background that may not be needed? I would never suggest a real time process like audio players while using these image programs....
-
Hello you may need to change the setting in CO7 for the Capture Pilot server, be sure its using the same folders as the session. Kind Regards, Jon
-
Same problem and same fix: Odd that with Open CL on auto it worked for some time and suddenly needs it set to NEVER to work. P1 should fix this issue. Another annoying time waster. Kind Regards, Jon
-
Hello AFX: Nice post, I have seen some of these same issues. Worst problem I see is the odd behavior of cropping, sometimes you cannot independently adjust both vertical and horizontal crops. It se...
-
Hello Drew! I did create a support case and also sent a note about this issue, to Ulf and Jon G. Waiting for further info! And happy to do more tests! Kind Regards, Jon
-
Hello all: I built a hex core AMD Phenom II with 16 GB RAM for about $1500, last August. AMD gives more "Bang for the buck" than Intel CPUs! It runs CS5 and C1 fine, using P45+ thethered. MoBo was ...
-
Hello all: I am using C1 ver 6 64 bit on my W7 workstation. All was working fine until I made an upgrade, to put a bigger SSD C:/ in my workstation, 60G to 240G SSD.I cloned the old C: drive and r...
-
Hi there just saw your thread: I found that besides open CL and a 1G passive cooled video card, the best investment is as much RAM as possible, I have 16G DDR3. Also consider the biggest and best m...
-
Hello all: Running a Windows 7 PC, with no other issues. I Crash C1 ver 6.4.3 if any other program is running (eg Photoshop) and you start the Capture One server.If NO other pgms run, its usually (...
-
Hello again I just tried it on my Win XP workstation: It does not crash and Capture Pilot works fine (as long as Bonjour service is enabled and started!) Best, Jon