The system reports to be out of memory and needs to be restarted.
Due to the increased demand in system memory Capture One requires for advanced tasks and handling ever bigger files, the 32bit OS has certain limitations under its default configuration.
Ultimately, the best solution is to upgrade the OS to 64bit.
A workaround for users who do not have this option is to enable the 3GB switch to extend the virtual address space for processes and applications. This is a system-wide change, so all the applications that use IMAGE_FILE_LARGE_ADDRESS_AWARE in the process header will be effected.
Enable the 3GB switch on Windows XP
1. Right-click on My Computer. Navigate to Properties.
2. In the System Properties dialog box, click the Advanced tab.
3. In the Advanced tab, under Startup and Recovery, click Settings.
4. In the Startup and Recovery dialog box, under System startup, click Edit.
The Windows boot.ini file will be opened in Microsoft® Notepad.
5. Create a backup copy of the boot.ini file.
NOTE: Boot.ini files may vary from computer to computer.
6. Select the following line in the boot.ini file:
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional"/noexecute=optin /fastdetect
7. Press Ctrl+C to copy the line and then press Ctrl+V to paste it immediately below the original line.
NOTE: Your text string may be different from the text string in this solution, so be sure to copy the text string from your boot.ini file and not the text string provided here.
8. Modify the copied line to include “ /3GB”, as shown in the following example:
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional 3GB" /3GB /noexecute=optin /fastdetect
NOTE: Do not overwrite any existing lines.
9. Save and close the boot.ini file.
10. Click OK to close each dialog box.
11. Restart your computer. During startup, select the 3GB option. If you do not select the 3GB option, the system will default to the 2GB total memory setting.
NOTE: If problems occur during the startup process, you may need to update some of your drivers.
Enable the 3GB switch on Windows Vista/7
1. Right-click Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
2. In the Command Prompt, enter "bcdedit /set IncreaseUserVa 3072" (without quotes). Press Enter.
3. Restart the computer.
Disable the 3GB switch on Windows Vista
1. Right-click on Command Prompt in the Accessories program group of the Start menu. Click Run as Administrator.
2. In the Command Prompt, enter "bcdedit /deletevalue IncreaseUserVa" (without quotes). Press Enter.
3. Restart the computer.
For more information on the 3GB switch, refer to the following Microsoft MSDN article.