Capture One 22 (15.3.2) is a service pack containing several bug fixes, along with additional camera and lens support.
Previous release notes can be found here
Contents
New Camera Support
New Lens Support
Bug fixes Mac
Bug fixes Windows
System requirements
Installation
Recommendations and limitations
Known issues
File support: Notes and limitations
New Camera Support
Canon R7 (USB and wireless tethering)
Canon R10 (USB and wireless tethering)
To find the full list of all supported cameras, click here.
New Lens Support
Fujifilm Fujinon XF150-600mm F5.6-8 R LM OIS WR (Super EBC)
Bug fixes Mac
Fixed a bug with Canon R5 where the sensor would move during live view and remote capture
Fixed a bug where Clarity, Black and White, Vignetting, and Purple Fringing were unavailable in Capture One Express
Fixed a bug where Canon cameras could not capture remotely during Live-View
Fixed a bug where some RAWs from the Fujifilm X-H2Ss could not be processed
Bug fixes Windows
Fixed a bug where keyboard navigation in the browser would jump to the end of the collection
Fixed a bug where Clarity, Black and White, Vignetting, and Purple Fringing were unavailable in Capture One Express
Fixed a bug where overlays would not show correctly when in Live-View
Fixed a bug where Canon cameras could not capture remotely during Live-View
Fixed a bug where some RAWs from the Fujifilm X-H2Ss could not be processed
Fixed a bug where the sort order would change inadvertently
Improved Fujifilm Live-View performance
System requirements
We recommend that your computer has at least the minimum specifications outlined below to run Capture One.
Microsoft® Windows® minimum requirements
• Intel or AMD CPU with 2 cores
• 8 GB of RAM
• 10 GB of free hard disk space
• Calibrated monitor with 1280x800, 24-bit resolution at 96dpi
• Windows 8.1® 64-bit, Windows 10® 64-bit*, or Windows 11®
*Windows 10 is supported for builds from 1607 through to build 21H2.
Apple® Macintosh® minimum requirements
• Intel® Core™ i3 (1st generation)
• 8 GB of RAM
• 10 GB of free hard disk space
• Calibrated monitor with 1280x800, 24-bit resolution at 96dpi
• macOS 10.15, macOS 11, macOS 12*
*MacOS 12 is supported for builds up to 12.5
Recommended system requirements
If working with high-resolution images and doing calculation-heavy adjustments we recommend the following:
• Intel CPU with 4+ cores
• 16+ GB of RAM
• Solid State Disk (SSD)
• NVIDIA or AMD GPU with 8GB+ RAM (or equivalent)
• Calibrated monitor with at least 1920x1200, 24-bit resolution at 96dpi
4k / 5k monitors
Due to the significant additional calculation overhead, systems using 4k/5k monitors will require additional resources in addition to the above-recommended spec (both in GPU and CPU power). For a professional experience, we recommend at least doubling the specification above for these configurations.
Installation
Capture One 22 is compatible with the earlier 7.x, 8.x, 9.x, 10.x, 11.x, 12.x versions. It is recommended to migrate images from 4.x, 5.x., and 6.x to version 8.x before opening them in 22.
It is generally recommended that you only install one version of Capture One on any single computer. A single-user license allows up to 2 activations on computers that you own or of which you are the principal user.
The license can be used with both Windows and Mac platforms. Multi-user licenses are also available from the Capture One web shop or from your retailer. Please read the release notes carefully before you install Capture One.
Install on Windows
To install the software please follow the procedure below.
1. Download the application from the Capture One website.
2. Run the executable software install file (.exe).
3. Carefully read and accept the license agreement presented.
4. Follow the on-screen instructions to complete the installation. Capture One will initiate the installation of Microsoft® .NET Framework 4.7 if you do not already have it.
Install on macOS
To install the software please follow the procedure below.
1. Download the application from the Capture One website.
2. Open the Capture One disk icon (.dmg).
3. Carefully read and accept the license agreement presented.
4. Drag the Capture One icon to the Applications folder.
5. Open Capture One from your Applications folder.
Manual update to the latest version
It is important to keep Capture One software updated. After the activation and registration, you will usually receive a newsletter reminder that an update is ready for download, although it can be more convenient to choose Capture One -> Check for Updates (Help -> Check for Updates on Windows). If your Capture One application is downloaded from www.captureone.com, it will always be the latest version. You can also schedule an automated update if needed by navigating to Capture One -> Preferences (Edit -> Preferences on Windows).
Recommendations and limitations
For all users
• When you have disconnected a camera, do not reconnect a camera until the Camera tool status changes to "No Camera Attached".
• DNG support not optimized for some cameras.
For other camera users
• The following functionality is not supported for Fujifilm X-trans RAW files: processing/exporting to DNG.
• Some cameras provide multishot functionality by way of (e.g.) multiple exposure or pixel shifting. In most cases, the functionality will not be available in Capture One, however, a single RAW file from the “stack” may be viewable and editable in Capture One (as if it was a shot in single Capture mode).
For digital back users
• Unless otherwise specified for your Phase One camera system, do not open the shutter on the camera prior to opening the Live View window. Doing so will generate errors on the digital back after closing the Live View window. The recommended procedure for using Live View is to first open the Live View window, then open the shutter on the camera, use Live View as desired, when done, close the shutter on the camera, and close the Live View window.
• Focus controls for iXR and iXA cameras are only supported by IQ and Credo backs.
Known issues
Find a list of known issues for Capture One at the time of shipping.
All users
• Browsing folders containing unsupported image files may affect application performance.
• Previews from earlier versions of Capture One may be updated. In some cases, this can affect the application performance the first-time images are viewed in this version of Capture One.
• Using a non-US laptop keyboard might be preferable to change some of the standard keyboard shortcuts.
• Editing images in external applications other than Adobe Photoshop might result in unexpected behavior.
• Operation under virtualization software (e.g. Parallels, Hackintosh, etc) may cause instability. We do not recommend you use these OS configurations.
Mac users
• Live View over USB can stall without the use of a repeater.
Windows users
• Windows drivers are required for some older models of Canon DSLR cameras to be able to shoot tethered. These drivers are available from Canon’s web site.
• Importing a catalog can result in the last picture not getting imported.
• Operation under RAMDisk by Dataram is known to cause issues with disk labeling. Capture One is not supported with this configuration.
• If you have Bonjour 2.0.3 installed, you may experience problems with Capture Pilot. Bonjour 2.0.2 (shipping with Capture One 9) and 2.0.4 (shipped with iTunes) have been tested to work with Capture Pilot. To check the version number of Bonjour, go to 'Control
Panel' and select ‘Programs and Features’.
• Plays.TV/Raptr/RivaTuner installed along with some AMD devices can cause instability
File support: Notes and limitations
The information here is subject to change. Some errors may be omitted. For issues and clarifications, contact Capture One Support via captureone.com/support
HEIC/HEIF support
Capture One supports HEIC/HEIF 8-bit files to the extent that the operating system supports the files. If you are on a Windows computer, you might need to download the two extensions “HEVC Video Extensions” and “HEIF Image Extensions” from Microsoft to enable support in Capture One.
Capture One DNG colors
DNG files from camera models with native support in Capture One will per default have their native Capture One colors applied. DNG files from camera models that are not natively supported in Capture One will have generic DNG Standard colors applied.
We do not support adjustments and settings from other applications embedded in DNG files.
Other file support
TIF/JPG/PSD/PNG files that are not in RGB color space cannot be adjusted within Capture One and will be read-only.
Layered Tiff: Capture One 9.1 onward can support Tiff files with alpha channel or layers saved in the file (from other apps like Adobe Photoshop) but for viewing purposes only. Reprocessing the image will result in a new flattened image.
PSD: Capture 10.1 onward can support PSD files in the viewer. The PSD can contain any adjustments, layers, text or smart objects but must be saved in Photoshop with “maximize compatibility” enabled. Reprocessing the image from Capture One will result in a new flattened image.
File size limitations
• Smallest supported file for viewing: minimum side of 16 pixels.
• Smallest supported file for editing: minimum side of 512 pixels.
• Largest supported file: 715 megapixels or 65,000 pixels on the longest edge.
Camera support
RAW files support with known limitations listed in the notes section is available here. Special or auxiliary modes (like pixel shift) are only supported if noted. If the information provided is incomplete or you need specific information pertaining to support in Capture One, please create a support case - captureone.com/support
Comments
17 comments
Where to download? All links on captureone.com pointing to 15.3.1....
Kassur
The link please...
I installed 15.3.2 and I still don't see Black and White, Vignetting, and Purple Fringing
@Dorlas Make sure you've uninstalled 15.3.1 and run a clean install. See how to do that here: https://support.captureone.com/hc/en-us/articles/360002402377-How-do-I-uninstall-Capture-One-
If you've done that and you still do not see the tools, please create a request with our support team.
15.3.2 can be downloaded here: https://www.captureone.com/en/account/download
Where is the support für Pentax K3III?
Nice!
After a few tests, I confirm that the browser sorting issue is now corrected.
I was hopping that the inability of re-arrange layers (CO windows) was adressed too, but it does not.
Again, the update checker of version 15.3.1 (Windows) does not show there's an update available to this 15.3.2
The same was true for the upgrade from 15.3.0 to 15.3.1.
updated to 15.3.2.11 on a apple mbp 13 m1. after the update all my images show a warning that they are an unsupported file format both jpegs and raw fuji files
@Kosta You didn't do anything else other than opening your catalog/session in 15.3.2? No folders, images, or the catalog itself has been moved? I recommend opening Capture One whilst holding down the Alt key and then selecting another session/catalog from the list. Once you've done this, go to File > Verify Catalog or Session and then try repairing the document containing the 'unsupported' images.
@Propheticus This is an issue that's been with us for some time, sorry about that. The best thing to do is stay subscribed to the release notes page: https://support.captureone.com/hc/en-us/categories/360000430178-Release-Notes
The real 'best thing' to do would actually be for us to get it fixed, I know. I'll make the R&D team aware that this is still happening.
yes just upgraded from 15.3.1 to 3.2
I ll try your suggestion
I did the verify and repair , most of the pictures are ok but there are still a few with the same error both jpegs and raw files
I cannot see any pattern on the issue, I have pictures with the issue that were imported a day ago as well as old ones. All pictures with the issue exist in the respective folder when I choose show in finder
I ve been using capture one since version 10 and never had any issue till now
@Kosta Are you using a catalog or a session? If you're using a catalog, try synchronizing or locating the folder being used in the catalog. How many images are affected out of 10, just as an estimate?
Are you able to import these images into another catalog/session or do they continue to show the same message? If that's the case then the files may be corrupt and unreadable.
Bonjour,
En voulant mettre à jour la version Capture One 22.Win.15.3.2, Capture One ne s’ouvre plus ! Un message s’affiche au lancement 'Pour exécuter cette application, vous devez installer les frameworks manquants pour . NET', il me demande de l’installer, je clique sur 'Oui' mais rien ne se passe !!! j’ai redémarrer mon PC mais toujours le même problème.
L’application ne fonctionne plus et j’ai des retouches en cours.
Avez-vous une solution à ce problème, svp ? Merci. En attente de votre retour dès que possible.
Cordialement.
Fabrice
Please sign in to leave a comment.