Capture one 22 (15.2) cannot load the NVIDIA card properly
Recently I’ve installed Capture One 22 (15.2). Before I had the previous version 14.4 and with NVIDIA driver 471.41 I didn’t have any problem (I’ve previously reported how to successfully set windows and NVIDIA control panel in order to rebuild the Capture One core and have the NVIDIA video drive working correctly).
But now, after installing the Capture One 15.2 when I export file, only the integrated GPU is working and the NVIDIA video card (1660 Ti) shows just a slightly load of 2-4 % (instead the iGPU shows 90-100%).
I’ve tried several tricks (I also installed the latest NVIDIA studio Driver) but nothing has changed. However if I zoom in at 100% and quickly move the picture I see that the NVIDIA 1660 Ti works at 40% (ad the iGPU Intel).
Do you have any idea or method to let the 1660Ti doing its job ? In the log file (ImgCore.log) I don't see errors but only several 0xE06D7363 - C++ exception. My laptop is updated to the latest Windows 21H2 version
-
Thanks GB. I've already done those procedurs, of course, because personally I've already suggested to other users how to improve the performances, but this time even using this approach, still the GPU is not loaded properly during the file export.
0 -
What about disabling the integrated card in BIOS, at least temporarily?
0 -
what I did is to enable also The Hardware-accelerated GPU scheduling and the NVIDIA GPU now is very loaded.
in the windows settings (Select Start > Settings > System > Display), in the display tab at the bottom of the page there is graphics setup (System > Display > Graphics Settings). In this new window, The Hardware-accelerated GPU scheduling option is displayed. I activeted the option and then reboot the PC.
0
Please sign in to leave a comment.
Comments
4 comments