Sigma 50mm 1:1.4 DG HSM | A (EF mount) not recognised on Canon EOS R6

Permanently deleted user

• 10 de marzo de 2022 21:20

I have a "Sigma 50mm 1:1.4 DG HSM | A (Canon EF)" that I use on a Canon EOS R6 with a Canon EF-RF adapter (with control ring if that matters). After importing the raw file, Capture One 22 recommends to use the profile for the "Zeiss Milvus 1.4/50 ZE (Canon EF)" lens, instead of the profile for the actual lens that is available in the library. 

Can I do something to correct this, or does this require some other bug fix somewhere?

0

• 

  SFA

  • 11 de marzo de 2022 15:21

  Are you sure the correct identification for the lens makes it through the adapter?

  0
• 

  Permanently deleted user

  • 11 de marzo de 2022 19:54

  I'm not sure the EF-RF adaptor is the issue, and other lenses get through without issue. Those other lenses happen to be made by canon though.

  In Canon's DPP4 I see that the lens is identified only as "50mm", which is technically correct, but also a little disappointing. However the identification is the same regardless of the camera that I can test with: it is the same on the R6 with adapter and on the 7D (obviously without adapter). So the issue is with the lens itself. 

  So I should probably be asking for a preference where I can pre-set the set of lenses I actually own to reduce the size of the list I have to search through. 

  0

La publicación no admite más comentarios.