frank Oudeman
- Actividad total 24
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 6
Resumen de la actividad
Última actividad de frank Oudeman-
frank Oudeman hizo un comentario,
It never was resolved unfortunately since you/hardware support wasn't able to reproduce the misalignment. This keeps on happening and has been happening for many C1 versions. It mostly happens wit...
-
frank Oudeman hizo un comentario,
Ah ok. I had made a case with C1 and Phase1. The images have been downloaded by Phase 1 under Case Number: CAS-00014228 CRM:0108000003819. Would that help? How should I proceed from here?
-
frank Oudeman hizo un comentario,
Lukasz, you're correct—same images just different exposures. Communicating with you is not talking to support? Can you forward this link to support so I don't have to start this process over agai...
-
frank Oudeman hizo un comentario,
Hi Lukasz, yes correct. All three images have the same pov and lens corrections. Layer the three exposures on top of each other in PS and see if they line up. Best is to try your own resetting o...
-
frank Oudeman hizo un comentario,
Thank you, I will send a request. Best, Frank
-
frank Oudeman creó una publicación,
Lens correction tool with lens movement
I use Rodenstock 32mm and 23mm lenses with shifts on technical cameras. These lenses greatly improve their view/look and need the lens correction tool/profile. The problem I run into continuously ...
-
frank Oudeman hizo un comentario,
Yes, I fully agree with all the comments. This upgrade forced me to downgrade back to 14.2. Please give the option.
-
frank Oudeman creó una publicación,
How to add to C20 licence for a Sony camera
I have a C20 license through my IQ4150 and have bought a sony license to add that camera capability to my license. How can I do this since I have two different license codes without canceling my D...
-
frank Oudeman hizo un comentario,
Just a regular tiff but it could be psd file for that matter. My question is why C1 doesn't process out the designated ICC profile consistently? My example is "embed camera profile" since that is...
-
frank Oudeman hizo un comentario,
The purpose of outputting the file with embedded camera profile is just to bring the file into PS to further work on. Talking to my dealer DT here in NY it was recommended to output in embed camer...