How do I apply Adjustments to images?
In 3.7, when I adjust color and exposure etc. one image, I can easily apply specific adjustments to other images with two clicks.
In 4.0, this does not function the same and I can not figure out how it works. Thus far, I have made adjustments to a first image, and then selected to add adjustments to other images. The issue is, any and every adjustment made to the first image transfers to the other images selected. How can I ONLY add SPECIFIC adjustments such as only adding the contrast to the selected images, or only adding the saturation and exposure adjustment, without adding ALL of the adjustments made to image one?
It seems that when I "copy" and add adjustments, it adjusts everything from white balance thru exposure.
In 4.0, this does not function the same and I can not figure out how it works. Thus far, I have made adjustments to a first image, and then selected to add adjustments to other images. The issue is, any and every adjustment made to the first image transfers to the other images selected. How can I ONLY add SPECIFIC adjustments such as only adding the contrast to the selected images, or only adding the saturation and exposure adjustment, without adding ALL of the adjustments made to image one?
It seems that when I "copy" and add adjustments, it adjusts everything from white balance thru exposure.
0
-
Go to the adjustments tab (the icon is a square with lines inside) in the tools panel. There you can check and uncheck the settings you want to apply to other images.
Regards,
Maren0 -
I see the lens Copy Adjustments tool and yes, it copies adjustments. I also see the Apply Adjustments tool right next to it.
What I do not see is any type of check box to select specific adjustments. I may only want to apply saturation, but NOT exposure and contrast. In 3.7 I could single these out. Is this an option that I am just not seeing?
Dana0 -
Uups... Sorry, I meant the Adjustments tool in the settings tabs (where the file browser and the other settings are), not the copy/paste adjustment tool in the tool bar. A bit difficult to describe... Where the settings are located (file browser, quick settings, levels and curves etc.) there is a tab with an icon that is a square with lines inside. It's the third one from the right. That's the one you need...
Regards,
Maren0 -
Aha! I finally located the "select adjustments" tool. A manual would be truly helpful for new software, just a thought.
For others, the tool is located on the top left, between the info and process tools.
It also took me a while to locate the Lens Cast Calibration Tool. Again, an accurate manual would have saved me 30 minutes.
The Lens Cast Tool is on the bottom of the color palette tool box.0 -
[quote="danahoff" wrote:
A manual would be truly helpful for new software, just a thought.
Go to the Help menu, select Capture One Help and you will see a pretty nice PDF manual with 71 pages opening up in Preview... 😉
Regards,
Maren0 -
Please; ignore or remove. I meant to create a new post. 0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
6 commentaires