H25 back and capture 4.6

No11

• 24 janvier 2010 19:28

I just got a used Phase One H25 back. There were no discs just the basic instruction papers that are not of much help. I have capture one 4.6 and it is not the pro version.
I am not sure what I am doing wrong but I can not get this to work. I have the camera tethered to the computer, the green light on the back is on. It appears that I am not connected to the camera at all. Is their a control software I need in addition to capture one?

Or do I need to have the pro version of capture one?

Any help would be appreciated.

0

• 

  Paul Steunebrink

  • 24 janvier 2010 20:23

  Hi,
  A few tips.
  - in the forum web page, enter 'H25' in the search box and you see a lot of similar posts that have responses which can help you too
  - not sure whether CO4 (or 5) in regular mode will tether; I do not think so; run in DB mode (in trial mode you get a selection screen during start, in regular mode, first deactivate to get the selection screen and select DB mode or some similar description)
  - if you like CO4, go to the latest (4.8.3, free update if you run in DB mode or retain your current license) or otherwise download CO5 (free as well in DB mode); in case you have CO4 license for the regular version, install CO5 which will not affect CO4 installation and run CO5 in DB mode retaining CO4 (4.8.3 preferably) for your DSLR files.
  - check whether your H25 back shows-up in Windows Device Manager; if not, see tips from search like firewire card, cable, power setting back

  0
• 

  Drew Altdo

  • 28 janvier 2010 03:00

  No11,
  This may also help. Not sure what documentation you have.
  
  http://xchange.phaseone.com/Global/docu ... on_DB.aspx

  0

Cette publication n’accepte pas de commentaire.