Bill_H
- Activité totale 26
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 8
Aperçu des activités
Dernière activité effectuée par Bill_H-
Bill_H a ajouté un commentaire,
Did you get a chance to see the video? It is more a 'walk-through of the functionality' and may be what you are seeking.
-
Bill_H a créé une publication,
What's REALLY most important ...
Reading the forum I see many people complaining about many things, and I agree that things like the interface changes, the cache location, even removing the mouse-scrolling are disappointing. I've...
-
Bill_H a ajouté un commentaire,
Tom, I just went thru a full support case cycle and right now it is taking them a while to respond so probably you just have to be patient (I'm sure that's not what you want to hear).For specifics,...
-
Bill_H a ajouté un commentaire,
lpcd2001, C1 3.7.7 works with the 1D M III except for these two things: 1) the High Tone Priority custom function is not recognized, and 2) there's a small strip of garbage pixels left at the botto...
-
Bill_H a ajouté un commentaire,
John Malloy wrote: "Hey, Bill....I'm gonna be testing Highlight priority soon....can you confirm wether Adobe accommodates HP"Yes, ACR interprets the custom function correctly and the exposure is r...
-
Bill_H a ajouté un commentaire,
Just to update this in case other 1D Mark III users have this problem, apparently the problem occurs if you set Custom Function II-3 (Highlight Tone Priority) since COne doesn't recognize this CF a...
-
Bill_H a ajouté un commentaire,
banzai, in re-reading this thread I see you had suggested it might be this CF in your first post and I should have tested this after your post, so you deserve credit for figuring it out too.I sent ...
-
Bill_H a ajouté un commentaire,
John, you solved it! Thanks, I'll fill out an updated support case and send it to Capture One, they will be thrilled to know the 'solution'.I just re-shot the grey-card/white-card again and with t...
-
Bill_H a ajouté un commentaire,
We are using both 3.7.7 and 4.0 and there are no problems.
-
Bill_H a ajouté un commentaire,
I'm getting the same message ... is this a problem on my end (say my firewall settings or something like that) or is Phase One just overloaded for a bit?Anyone know?