4.1 Profiles for P25

crosshair

• 2008年05月15日 14:54

As a previous user of 3.x and a P25 I often used the additional Profiles: Phase One P25 Skin 1-4. In 4.1, these are now buried under "Other" and cannot be accessed an easier way (moving them to a preferred or recommended list). I also cannot seem to be able to set the profile under "Base Characteristics" and have it become a default profile while tethered. Each capture while tethered defaults to Product Flash. Am I missing something or is this another item in development?

0

• 

  Pascal Despeaux

  • 2008年05月20日 21:43

  I had the same remark 😕 I change my workflow because the result in C1 V4 is really great. To resolve this limitation I use a fonction "Copy adjustments" on the first capture and I apply when I select on other.. With, all corrections or choices are applied, USM and ICC profile too. 😂

  0
• 

  Paul Steunebrink

  • 2008年05月21日 07:19

  hi crosshair
  For your additional P25 profiles to show up in the P25 section of ICC profiles in CO 4.x, you could try the following 2-step process of copying and renaming the profiles.
  
  First, copy the profiles from their source location - could be <volume>/Library/ColorSync/Profiles - to the Capture One 4 program package:
  <volume>/Applications/Capture One/Contents/Resources/Profiles/Input
  Note that to get into the package, you have to open it with the Show Package Contents option (right click on Capture One in Applications).
  
  Next, rename the profiles to the naming convention used in that ../Input folder. For the P25 it should start with 'PhaseOneP25-'
  Note that if you install an update of CO 4.x these profiles will be erased. Therefore I keep a copy of all my renamed profiles in a backup location.
  
  Good luck.

  0

投稿コメントは受け付けていません。