Manuell input of aperture and shutter speed

spassig

• 2014年03月10日 20:17

I will use DLSR and non DLSR (Hasselblad) with C1.
Is there a possibility to store aperture and shutter speed by hand?
Or can I define additionally fields for text to store this info?
At the moment I'm not familiar with C1.

Regards

Jochen

0

• 

  Drew Altdo

  • 2014年03月11日 12:50

  Sorry but I do not understand what you are asking.
  Are you trying to record Metadata manually? If so, this is not entirely possible as the nature of Metadata is non-editable and recorded by the camera only.

  0
• 

  spassig

  • 2014年03月11日 13:08

  Thanks for feedback
  

  [quote="Drew" wrote:
  
  Sorry but I do not understand what you are asking.
  

  
  No problem
  
  

  [quote="Drew" wrote:
  
  Are you trying to record Metadata manually? If so, this is not entirely possible as the nature of Metadata is non-editable and recorded by the camera only.
  

  
  Normally this data (called Metadata) are stored in the fotos.
  Normally this data comes only in electronic components.
  I use a mechanical camera with mechanical lens.
  So Metadata not available.
  My question:
  Is there a possibility in C1 to store by hand in one ore more fields relevant info, for example aperture or shutter speed?
  
  Jochen

  0
• 

  Drew Altdo

  • 2014年03月11日 14:03

  [quote="spassig" wrote:
  Is there a possibility in C1 to store by hand in one ore more fields relevant info, for example aperture or shutter speed?

  
  
  As this information is not recorded by a mechanical system, there is no way to add it to Metadata. Again, metadata is recorded at the time of Capture, if recording the data is not possible then it is not present.
  You can certainly add the data to an IPTC field if you wish.

  0
• 

  Corey Riggle

  • 2014年03月11日 14:56

  It's possible. Just not something that is normally supported. Take a look at Exif Editor. http://exifeditorapp.com/

  0
• 

  spassig

  • 2014年03月11日 16:25

  Thanks for feedback
  

  [quote="Corey Riggle" wrote:
  It's possible. Just not something that is normally supported. Take a look at Exif Editor. http://exifeditorapp.com/
  

  
  
  I don't see Phase One on Supported file formats
  
  http://exifeditorapp.com/mac/tech-specs/
  
  Jochen

  0
• 

  Dirk Wenzel

  • 2014年03月12日 12:15

  Hi Jochen, 😉
  
  Because this program is based on "ExifTool", it should work with the P45 files.
  
  j.m.t.c.
  
  p.s.:
  http://www.sno.phy.queensu.ca/~phil/exiftool/

  0

投稿コメントは受け付けていません。