Fujifilm not working for X-T10 and older?

mlflix

• 2018年12月13日 16:09

Trying out the Fujifilm version but will probably ugrade to the normal version of 12 pro.

Noticing that film sims are not showing up in Base Characteristics. Saw in a vid that the older cameras are not supported for this.

I've been processing images from my X-t10 for years and it's fine but was curious to see the film sims although sometimes they are a bit too much out of camera and was hoping to be able to dial them down in C1.

If I buy the normal version will I be able to see Fujifilm sims or do I have to buy the specific Fuji version- and will that support Canon and other systems? (loaded question I know.)

0

• 

  Emile Gregoire

  • 2018年12月13日 16:30

  Fujifilm film simulations are currently only supported on these cameras: GFX 50 S/R, X-T3, X-T2, X-H1, X-Pro2, X-T20, X-E3 and X100F. Doesn't matter if you're using the Fujifilm Express / Pro or the normal Pro version. No idea if that will change in the future.
  
  The Fujifilm versions, like the Sony versions, will not handle other camera systems. For that you need the normal Pro version, which includes all these cameras and includes the Fujifilm sims: https://www.phaseone.com/supported-cameras
  
  Hope that helps!

  0
• 

  mlflix

  • 2018年12月13日 17:37

  Thanks! Bummer for those who own the older versions. The X-T10 is still a great camera!

  0
• 

  SFA

  • 2018年12月13日 20:25

  [quote="Likovsky" wrote:
  Thanks! Bummer for those who own the older versions. The X-T10 is still a great camera!

  
  
  Previous posts on other threads suggest that some of the older cameras may not have the capability to make use of any profiles that might be created but in other cases if might be worth asking Fuji what their plans are.
  
  
  HTH.
  
  
  Grant

  0

投稿コメントは受け付けていません。