Cannot process files!

Bolinphoto

• 2011年01月14日 16:09

Running 6.1. Been using Capture One for years. Everything eles runs fine with the software, but I cannot process my files to output folder. Cannot process any tiff or quick jpeg recipe that is checked. There no files in the batch folder to hold anything up. When I click the Process image button or use the quick key command nothing happens. Already tried reinstall. Ideas? Thanks

0

• 

  Paul Steunebrink

  • 2011年01月14日 17:08

  Start with cleaning up the process history (Batch tool tab).

  0
• 

  Bolinphoto

  • 2011年01月14日 17:49

  Thanks for the good start! I had to create a new floating Batch Tool window and drag it to the Batch Tools section of Capture One. Somehow this section was completely blank. Adding the tool let the images start to process. Yea!

  0
• 

  Gareth

  • 2011年01月14日 18:22

  Yes, I've found this bug in C1.
  
  You have to have have the batch tool tab in the tool section for the process to work. If you don't use the batch tool (I don't) and remove it from your tool set eventually C1 will stop processing regardless of what you press. Put the batch tool tab back and the processing fires up.
  
  I contacted Phase about this and they just told me to keep the batch tool tab active.
  Not really a fix but a work around.

  0
• 

  Paul Steunebrink

  • 2011年01月14日 21:00

  If you don't like the batch tool tab, you can place the tool on another tab and leave it collapsed. Next, you remove the batch tool tab and save the workspace.

  0

投稿コメントは受け付けていません。