メインコンテンツへスキップ

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

C1 pro compatibility with Aptus 75

Michael4721
I have an Aptus 75, H fit which I use on a Mamiya RZ via an adapter, I currently use Leaf's capture software. I would like to upgrade my C1 LE to pro, to enable me to shoot tethered from my leaf on the same software I use for my 35mm stuff. Could someone let me know if shooting tethered to C1 pro from my leaf Aptus 75 is stable, and if there are any issues I should know about before upgrading?

Regards
Mike
0

コメント

7件のコメント

日付 投票
  • Paul Steunebrink
    Just for the record, you are aware that you can use CO 6 for 30-days fully functional trial mode, which includes support in case you encounter any issues?
    0
  • Permanently deleted user
    This problem persist to exist in 6.2.2

    viewtopic.php?f=40&t=10845
    0
  • Michael4721
    [quote="Paul_E" wrote:
    Just for the record, you are aware that you can use CO 6 for 30-days fully functional trial mode, which includes support in case you encounter any issues?



    Unfortunately the trial doesn't allow tethering which is the main feature I'd like to check the stability of.
    0
  • Paul Steunebrink
    [quote="Michael4721" wrote:
    [quote="Paul_E" wrote:
    Just for the record, you are aware that you can use CO 6 for 30-days fully functional trial mode, which includes support in case you encounter any issues?

    Unfortunately the trial doesn't allow tethering which is the main feature I'd like to check the stability of.

    Run the trial as CO Pro, not DB and it should allow you tethering. Or is there something I am missing?
    0
  • Ulf Liljegren
    ..one thing.

    You have to in the software, go to "Capture One" -> "Install Leaf Drivers"

    This you have to only do once.
    0
  • Mark Batchelour
    I use an RZ with C1 and an Aptus 75. I think I tried tethering once when C1 6 was first out, but I don't work indoors much, so haven't tried much recently. I do remember that I used the latest LeafCapture to upgrade the back firmware. C1 6.2.1 works well with both compressed and non compressed .MOS files off the card.

    If you can wait a week, i'll try some tethered shots with it.

    Mark B
    0
  • Yair Shahar
    [quote="Michael4721" wrote:
    I have an Aptus 75, H fit which I use on a Mamiya RZ via an adapter, I currently use Leaf's capture software. I would like to upgrade my C1 LE to pro, to enable me to shoot tethered from my leaf on the same software I use for my 35mm stuff. Could someone let me know if shooting tethered to C1 pro from my leaf Aptus 75 is stable, and if there are any issues I should know about before upgrading?

    Regards
    Mike


    With your (non-II) Aptus you will notice slower preview creation when shooting tethered compared to Leaf Capture. Otherwise you will benefit from all the advanced tools for adjusting, editing and processing your images, as you know from your 35mm

    As mentioned above, it need to run in PRO mode and to have the Leaf Installers enabled. Make sure that the correct camera type is selected in the Capture preferences and that the "Leaf" box there is checked

    Yair
    0

投稿コメントは受け付けていません。