LCC Preset Grayed out - cannot apply?
Hi - I'm having problems with applying LCC presets to existing old files.
I have some old 2011 images that were taken on a P65+ and Tech camera body. No LCCs were taken at the time, and the simple 2 way stitch shows some lens Cast on the left and right panels. I borrowed a friends P65+ and shot some basic presets using the exact same camera and lens and shift settings to create generic presets, but with 'dust removal' information not selected. Obviously his serial # is different from what mine was (I'm now on IQ180) but its the exact same type of back.
I went to a lot of bother doing this, saving presets, only to find that C1 7.1 will not allow me to load those preset LCCs - they are grayed out. Is this simply because it is a different serial # of back? That's very weird if so, I'm just trying to get in the ballpark here with an image that needs some correction, and not asking for dust remocal.
How can I force it to apply my presets from another P65+? Thanks.
I have some old 2011 images that were taken on a P65+ and Tech camera body. No LCCs were taken at the time, and the simple 2 way stitch shows some lens Cast on the left and right panels. I borrowed a friends P65+ and shot some basic presets using the exact same camera and lens and shift settings to create generic presets, but with 'dust removal' information not selected. Obviously his serial # is different from what mine was (I'm now on IQ180) but its the exact same type of back.
I went to a lot of bother doing this, saving presets, only to find that C1 7.1 will not allow me to load those preset LCCs - they are grayed out. Is this simply because it is a different serial # of back? That's very weird if so, I'm just trying to get in the ballpark here with an image that needs some correction, and not asking for dust remocal.
How can I force it to apply my presets from another P65+? Thanks.
0
-
Ps: I did try moving the LCC file into the same file as the original 2011 image, selecting both on screen, and trying to apply it that way. No luck. I just get an 'event log' warning.
Surely there is some way to apply the LCC color cast correction of a P65+ back to a different P65+ backs image?0 -
As far as I know, LCC is not only unique to a type of back, it is indeed unique to a back specifically (s/n). This might explain the behaviour you describe.
I suggest you contact your dealer or Phase One support to explore a workaround.0
投稿コメントは受け付けていません。
コメント
2件のコメント