CO7 Pro, questions about tools

Permanently deleted user

• 2013年01月05日 09:56

First of all : Happy new year to everyone !

Two questions about problems that popped up on CO7 Pro since the new year 2013 :

Tool buttons as following have disappeared from the main toolbar : Process button (the wheel to export a JPG file to another folder), and the B&W button, whilst the Capture button I never use has found his place on the rank ❓
How to reset the toolbar ?

The dust removal button is now absolutley tiny, I have to resize the diameter of the tool on every spot I leave on the file... Not easy quick use nor funny...
How to reset this tool ?

User's guide didn't give issues on these points, but my english is so bad, hope you will excuse my french 😜

Cheers 😉

0

• 

  Andreas Siegert

  • 2013年01月05日 11:57

  Right clicking next to the other tool icons should give you a menu where you can get the tools back.
  
  cheers
  afx

  0
• 

  SFA

  • 2013年01月05日 13:24

  Have you by any chance changed to a different Workspace?
  
  The menus and tool tabs are highly customisable and you can create your own tabs and Workspace for you specific needs. You may find some benefits from that.
  
  However I have, in C1 V6, seen odd situation where rescaling of screens, related to windows resolution settiongs, graphics card driver change/updates and a few other things, or so it seems, introduce "unusual" effects including, but not limited to, random process icons disappearing because the scale set for the monitor resolution no longer allows the display of all chosed icons.
  
  As another example of odd things that can happen - I run 2 screens, different sizes and different resolutions. One is a touch screen, though the touch concept is something I rarely use. This screen allows scaling, via the graphics card, to give a 'best fit' taking into account the needs to map the 'touch' part of the functionality away from the very edges of the display area because touch becomes difficult to use there.
  
  The idea is to make as much of the screen available as possible without it messing up other things.
  
  Using the touch screen for something last night it simply failed to work at all. Odd I though until I noticed that the visual "touch" indication was appearing in just about the right part of the screen but on the other, non-touch, monitor.
  
  Clearly the system is confused. It is not something that I have changed (knowingly). I may leave it as it is since it works for everything except touch and I have found that adjusting settings for the screen display in the driver is not always a stress free activity ...
  
  As for the spot size. As far as I know the last used size for the tool will be stored for future use by default. If, for example, you were working at 100% and had set the circle smaller to fix something you will end up with a smaller (often too small) default size when you next use the tool. If you zoom in the circle size should grow to something easier to grab. Make it larger and then go back to the image size you wish to work with.
  
  Or you could simply change it using the radius slider in Spot Removal tool settings window so long as the circle is currently selected.
  
  I'm describing this based on V6 but I assume V7 is the same or very similar.
  
  I hope this is of some help to you. My apologies fo misunderstanding your problem if it is not.
  
  
  Grant Perkins

  0

投稿コメントは受け付けていません。