Capture 9.1 Problem with tethering

A strange thing happened today. After updating (or upgrading?) from CO 9.0.3 to CO 9.1 and upgrading my working session, tethering does not work correctly anymore.
Let me explain. I'm on Win 7 Enterprise and the only thing that has changed is the installation of CO 9.1. I use a Nikon D810 for digitization work and always shoot tethered. Never a problem.

The curious thing is that the Nikon is still recognized as attached to the machine and to CO. I can also activate (shoot) from within CO. But, the image name gets changed under the hood into something like ~312.NEF (which is not the file name CO should give it on loading according to my specifications), and does not load in CO. Only after a manual import.

I checked the camera settings. Nothing changed there. I deleted the camera and the drivers from Windows, and reinstalled them. To no avail. Did also an uninstall and reinstall of CO, by the way.

Has anyone encountered this behavior?

Permanently deleted user

2016年04月05日 08:38

Hi Pablo,

I have the same problem. I open a support case, when i ll have the solution, i ll post here viewtopic.php?f=62&t=22452&p=108211&sid=b090514e30d93a980bdfdcbffa2d6147#p108211

It's very strange, why the name picture change in ~202.NEF and other number ... what make it this changement !!

Wait and see

Christophe

Paul Slot

2016年04月05日 08:54

Christophe,

We'll see what they come up with. Otherwise, we'll just have to sit it out till the next update (or later). 😎
As I wrote in the other thread, in the meantime I work with Nikon Camera Control Pro while tethering.

Pablo

2016年04月08日 13:19

Hi Pablo,

Finally i found where problem is from

Here C:\Users\....\AppData\Local\Phase_One\CaptureOne.exe_StrongName_y3yh4brhpfi14u41fltdrpfruizxirsn\9.1.1.14
The file user.config

Delete it and start CO.

Christophe

2016年04月12日 06:40

Thanks,

I'll try.

Pablo

コメント