3.7.5 now doesn't show the BW Icc profiles anymore...help
Just updated to the current version 3.7.5 i now noticed that the nice ICC BW profiles as seen in the earlier version 3.7.4 are now gone.
The mac that i'm having this problem is an old Powerbook G4 667mhz.
My other machine is a Mini G4 1.42mhz it has 3.7.4 and has the BW ICC profiles.
Any suggestions would be helpful.
Dan
The mac that i'm having this problem is an old Powerbook G4 667mhz.
My other machine is a Mini G4 1.42mhz it has 3.7.4 and has the BW ICC profiles.
Any suggestions would be helpful.
Dan
0
-
I just update my C1Pro and all the profiles are there... even the ones I created my self.
Perhaps some corruption on you side0 -
Thanks for the heads up.
Where should i be looking or what should I looking for?
I'm half tempted to try and do a clean install.
Although that may be a bit of overkill.
Suggestions?0 -
No problem with recognizing profiles here, whether Phase One or third party profiles. And they have fixed the glitch when switching between profiles which sometimes did not immediately register in the image preview. Most of the profiles in Capture One Pro are stored in your Mac HD > Library > ColorSync > Profiles. An Archive and Install seems overkill at this point. Have you repaired permissions after the update? 0 -
i have now found the ICC profiles and they are working properly.
I guess what I was looking for was they(the B/W profiles/effects) also showed up under the Effects heading too. They are no longer there but they do appear under the ICC Profile tab.
Is is possible to have them return there?
Most for convience sake.
Thank
Dan0 -
The Phase One profiles appear just below the Effects sub-menu under the Film Looks submenu. Personally, I downloaded some B&W profiles that had been recommended by Michael Reichmann for the 1Ds2 and find it convenient that they appear in the profiles drop down menu of the White Balance Tool. 0
投稿コメントは受け付けていません。
コメント
5件のコメント