C1 won't recognize 1d mIIn

NN118474UL

• 2007年10月21日 03:10

Hello, I'm using 3.7.7, and I just got a 1d MarkII n. I've shot tethered before with my 20d.

All software is installed, I believe, wia driver, and whatever else was on the disc, when I turn the camera on, the diolog comes up, I hit cancel, and then go to C1, select file-reconnect camera, but there is not a camera listed.

Any ideas as to what I am doing wrong?

Thanks

0

• 

  Ulf Liljegren

  • 2007年10月22日 00:18

  Hello
  
  This camera is currently not supported tethered, but it is supported as a file format.
  Please refer to the release note:
  http://www.phaseone.com/Content/Downloads/COforWIN.aspx

  0
• 

  NN118474UL

  • 2007年10月22日 00:25

  I'm reading the release notes, and it says there is tethered support for the 1d markIIn, am I not looking at the right thing?
  
  --------- copied from pdf----------
  Tethered camera support
  Capture One PRO has tethered support for the following cameras:
  Phase One:
  • P 45+, P 30+, P 21+, P 25+, P 20+
  • P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase
  Canon:
  • 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D
  • 5D, 20D, 10D, 350D/Rebel XT, 300D/Rebel, D60, D30
  ----------------------------------------
  
  I just used a 1ds tethered with 3.7.7

  0
• 

  NN118474UL

  • 2007年10月22日 00:39

  I didn't realize I needed to use the firewire connection, I was trying to use the usb connection, which is what the 20d has, but that only works for printing with the 1d, you have to use the firewire with the 1d.
  
  Thanks

  0

投稿コメントは受け付けていません。