Printing from Capture One
Jsem s CO maximálnÄ› spokojen, verze 5.1 je opravdu povedená 😄 , hlavnÄ› na w7 funguje výbornÄ›. ChtÄ›l jsem se zeptat, zda bude nÄ›kdy možnost pÅ™Ãmého tisku z RAW, aniž by se pÅ™edem musel provádÄ›t export do nastaveného formátu. Nemohl by se výpoÄet exportu vytvoÅ™it pouze virtuálnÄ› a pak rovnou spustit tisk? UrÄitÄ› by to urychlilo práci, hlavnÄ› v pÅ™ÃpadÄ›, že nenà nutné mÃt soubor který se tiskne nikde na disku, otevÃrat dalÅ¡Ã program, ze kterého by se to teprve tisklo. Snad mi rozumÃte.
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter
0
-
Peter,
If you're looking to contact a specific supporter it is better done through a support case, not the forum.
Please create a support case:
http://xchange.phaseone.com/content/sup ... nguageid=10 -
Jsem s CO maximálnÄ› spokojen, verze 5.1 je opravdu povedená 😄 , hlavnÄ› na w7 funguje výbornÄ›. ChtÄ›l jsem se zeptat, zda bude nÄ›kdy možnost pÅ™Ãmého tisku z RAW, aniž by se pÅ™edem musel provádÄ›t export do nastaveného formátu. Nemohl by se výpoÄet exportu vytvoÅ™it pouze virtuálnÄ› a pak rovnou spustit tisk? UrÄitÄ› by to urychlilo práci, hlavnÄ› v pÅ™ÃpadÄ›, že nenà nutné mÃt soubor který se tiskne nikde na disku, otevÃrat dalÅ¡Ã program, ze kterého by se to teprve tisklo. Snad mi rozumÃte.
Děkuji Petr
I am more than satisfied with the CO, version 5.1 is really hilarious, especially works well for w7. I was wondering if will ever be the possibility of direct printing from RAW, without first having to perform export to set the format. He could be calculated to create a virtual export and then run straight press? Certainly it would speed up the work, especially if it is not necessary to have a file that is printed anywhere on the disk, open another program, from which it only printing. Surely you understand.
Thank Peter0 -
Peter,
If you wanted you could likely just have a Hot Folder for your Printer to watch. Then Process direct to that folder and the images should go straight to your printer, no other software required.0
投稿コメントは受け付けていません。
コメント
3件のコメント