Lens Corrections
Hallo,
In the first C4.1 LE there where the lens corrections parameter for Contax Lenses.
And in the C4.5 I did not fint it. Anybody can tell me something?
Thank You!
In the first C4.1 LE there where the lens corrections parameter for Contax Lenses.
And in the C4.5 I did not fint it. Anybody can tell me something?
Thank You!
0
-
it's in the small (very small) triangle icon:
http://tinyurl.com/5orudw0 -
But you need a CO 4.x Pro activation. It is not available in the CO 4.x standard license. 0 -
[quote="Paul_E" wrote:
what? in 4.1.2 ("LE") lens corrections for Contax and Hasselbald (and Phamiya of course) were implemented ... I doubt that they "downgraded" LE with 4.5x
But you need a CO 4.x Pro activation. It is not available in the CO 4.x standard license.0 -
[quote="thomas" wrote:
[quote="Paul_E" wrote:
what? in 4.1.2 ("LE") lens corrections for Contax and Hasselbald (and Phamiya of course) were implemented ... I doubt that they "downgraded" LE with 4.5x
But you need a CO 4.x Pro activation. It is not available in the CO 4.x standard license.
In CO 4.1.x DB mode was introduced, providing several features as lens correction, that worked with Phase One files only. The feature was not suppressed in standard mode and you could use it with Phase One files in that mode. It was of no use for DSLR raw files, if I am correct.
This has basically not been altered in CO 4.5.x. Lens correction show up in DB and Pro mode. You can start CO 4.5.x in DB mode without license for your database back files. However, now CO 4.5.x Pro is available, you can now also use lens correction for non-Phase One raw files as well, assuming you start the program as Pro.0 -
[quote="Paul_E" wrote:
[quote="thomas" wrote:
[quote="Paul_E" wrote:
what? in 4.1.2 ("LE") lens corrections for Contax and Hasselbald (and Phamiya of course) were implemented ... I doubt that they "downgraded" LE with 4.5x
But you need a CO 4.x Pro activation. It is not available in the CO 4.x standard license.
In CO 4.1.x DB mode was introduced, providing several features as lens correction, that worked with Phase One files only. The feature was not suppressed in standard mode and you could use it with Phase One files in that mode. It was of no use for DSLR raw files, if I am correct.
This has basically not been altered in CO 4.5.x. Lens correction show up in DB and Pro mode. You can start CO 4.5.x in DB mode without license for your database back files. However, now CO 4.5.x Pro is available, you can now also use lens correction for non-Phase One raw files as well, assuming you start the program as Pro.
That's all great. But Fabrizio asked for the Contax Lens Data he already found in 4.1 LE... so I assume he's talking about Contax 645 with a Phase DB...0 -
[quote="thomas" wrote:
That's all great. But Fabrizio asked for the Contax Lens Data he already found in 4.1 LE... so I assume he's talking about Contax 645 with a Phase DB...
That should be available to him in DB mode (=without license) or with a Pro license, together with all other DB/Pro features, not available in the standard "LE" mode.0 -
I found it Thanks a lot, I was BLIND...
I'm curious to discover the new C4.5
Yes I'm a P25 with contax 645.0 -
Are lens corrections supported with the Mamiya ZD camera? Since Mamiya and Phase One are in a strategic relationship, I assume they are. Before buying OS X 10.5 upgrading to the Pro version, I want to make sure though. Thank you. 0 -
I tried with a ZD image (made with ZD camera and Mamiya 120mm lens) and found the same limited lens correction options as for any other DSLR. I think the current state for the Lens Correction tool is that it is only supported for Phase One backs on Contax, Hasselblad and Phase One camera. 0 -
[quote="Paul_E" wrote:
Actually the lens correction for Phase-DBs is just a preset. In case of the Contax lenses it's just a preset for chromatic aberration and purple fringing. As one can set presets for chromatic aberration (auto works quite good I think) for all cameras/lenses lens correction is for everyone not just for Phase-DB users.
I tried with a ZD image (made with ZD camera and Mamiya 120mm lens) and found the same limited lens correction options as for any other DSLR. I think the current state for the Lens Correction tool is that it is only supported for Phase One backs on Contax, Hasselblad and Phase One camera.
I have a P45 but do not have access to "sharpness falloff" and "light falloff". So these functions are maybe implemented for further support in the future. Too, there are values for tilt and shift but without any function yet.0 -
I'm running C1 V4.1.1xxxxxx and with the Mamiya 80mm F2.8 AF and ZD Camera, C1 says "Unsupported" next to "Profile". Should lens correction be working (enabled) with the 80mm? I do not have a C1 "Pro" license, just the regular "LE". Thank you. 0 -
BTW - "Thomas" - are you T_Streng? 0 -
[quote="John" wrote:
I'm running C1 V4.1.1xxxxxx and with the Mamiya 80mm F2.8 AF and ZD Camera, C1 says "Unsupported" next to "Profile". Should lens correction be working (enabled) with the 80mm? I do not have a C1 "Pro" license, just the regular "LE". Thank you.
Lens Correction in CO 4.1.x is a pre-release to the version in 4.5. Basically CO 4.1.x added Phases One DB support to the base or LE version for tethering and lens correction.
Now with CO 4.5, versions (standard/DB/Pro) have been separated and data back support extended and lens correction can be used for all images. You need a Pro license to have the lens correction available.0 -
[quote="thomas" wrote:
[quote="Paul_E" wrote:
Actually the lens correction for Phase-DBs is just a preset. In case of the Contax lenses it's just a preset for chromatic aberration and purple fringing. As one can set presets for chromatic aberration (auto works quite good I think) for all cameras/lenses lens correction is for everyone not just for Phase-DB users.
I tried with a ZD image (made with ZD camera and Mamiya 120mm lens) and found the same limited lens correction options as for any other DSLR. I think the current state for the Lens Correction tool is that it is only supported for Phase One backs on Contax, Hasselblad and Phase One camera.
I have a P45 but do not have access to "sharpness falloff" and "light falloff". So these functions are maybe implemented for further support in the future. Too, there are values for tilt and shift but without any function yet.
Thomas, thanks for the additions. I had not been looking into the tool that much. It seems it boils down to using the tool's settings individually and optionally making a preset out of it.0 -
Thank you for the clarification Paul. 0
投稿コメントは受け付けていません。
コメント
15件のコメント