New Mac (M1 Chip) with a P30+ on a Mamiya RZ

Allan Schoening

• 2022年07月08日 01:04

Hello - I have both C1-11 and C1-22.  Whenever I connect my RZ with a P-30+ back it'll connect to C1-11 (not 22) and the software will recognize the camera but it won't let me take pictures.  When I press the shutter nothing goes through (in spite of the fact it is connected and powering the back).  No files can be found in finder either.  I connect the back through a docking station that has a FW-800 port.  Thank you for your help

0

• 

  Michael Zeldin

  • 2022年07月10日 14:55

  One issue may be that your docking station is not compatible with your computer (which one) so that data from a FW cannot be transferred.  Have you confirmed that a FW 800 device (a hard drive, for example) can transfer data to the computer via the docking station?  Your computer  may not have the driver. Apple does offer a FW adapter to Thunderbolt cable that  uses the Thunderbolt port to  on the new M1 computers. May be worth a try so you can make a "direct"connection.

  0
• 

  Allan Schoening

  • 2022年07月11日 16:18

  Hi Michael - Thank you for your reply.  I have an OWC Thunderbolt 3 Dock.  Upon your suggestion, I plugged in a FW 800 HD and it worked!  Mounted, read, wrote, everything.  

  I have the FW to Thunderbolt adaptor and it didn't work.  It didn't even power the back.

  Any other suggestions?  Thank you

  0

投稿コメントは受け付けていません。