Bill_H
- 合計アクティビティ 26
- 前回のアクティビティ
- メンバー登録日
- フォロー 0ユーザー
- フォロワー 0ユーザー
- 投票 0
- サブスクリプション 8
コメント
Bill_Hによる最近のアクティビティ-
Tom, I just went thru a full support case cycle and right now it is taking them a while to respond so probably you just have to be patient (I'm sure that's not what you want to hear).For specifics,...
-
John Malloy wrote: "Hey, Bill....I'm gonna be testing Highlight priority soon....can you confirm wether Adobe accommodates HP"Yes, ACR interprets the custom function correctly and the exposure is r...
-
Did you get a chance to see the video? It is more a 'walk-through of the functionality' and may be what you are seeking.
-
I'm getting the same message ... is this a problem on my end (say my firewall settings or something like that) or is Phase One just overloaded for a bit?Anyone know?
-
banzai, in re-reading this thread I see you had suggested it might be this CF in your first post and I should have tested this after your post, so you deserve credit for figuring it out too.I sent ...
-
John, you solved it! Thanks, I'll fill out an updated support case and send it to Capture One, they will be thrilled to know the 'solution'.I just re-shot the grey-card/white-card again and with t...
-
Rob, he's asking about the 1Ds, not the 1D ... also, the black line is not the 'only hitch' with the 1D M III, the exposure is off, underexposed by about 1.2 stops.
-
We are using both 3.7.7 and 4.0 and there are no problems.
-
lpcd2001, C1 3.7.7 works with the 1D M III except for these two things: 1) the High Tone Priority custom function is not recognized, and 2) there's a small strip of garbage pixels left at the botto...
-
Just to update this in case other 1D Mark III users have this problem, apparently the problem occurs if you set Custom Function II-3 (Highlight Tone Priority) since COne doesn't recognize this CF a...