Philip Cruse
- Gesamtaktivitäten 22
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 6
Aktivitätsübersicht
Neueste Aktivität von Philip Cruse-
Philip Cruse hat einen Kommentar hinterlassen
Hi Dave, 120 may be a bit high, depending on your viewing. I use in the region of 80. Paper profiles aren't made with regard to monitor conditions, there's no way to do that, apart from the White ...
-
Philip Cruse hat einen Kommentar hinterlassen
Hi Dave, Glad it sort of works! The print being too dark is almost always caused by the monitor being too bright, even when/especially when calibrated! They are usually calibrated bright for videos...
-
Philip Cruse hat einen Kommentar hinterlassen
Hi, To those posters who are getting what looks like 'double-profiling' when printing, you are most likely inadvertently using the very poor Apple 'AirPrint' driver, even if printing via USB rather...
-
Philip Cruse hat einen Kommentar hinterlassen
Hi Billtils, Glad you like my site! I think, but aren't sure, that Print-Tool may support any printer? However, the associated QTR only supports Epson. I don't have a Canon so can't check. Yes, B&...
-
Philip Cruse hat einen Kommentar hinterlassen
Hi, I make Custom Profiles and have had several customers print my targets with the Adobe Color Printer Utility and Big Sur. I don't have Big Sur myself, but under Catalina you get a warning messag...
-
Philip Cruse hat einen Kommentar hinterlassen
Not sure where the confusion about 'FOGRA 39' is coming from as it's a CMYK profile for OFFSET litho and nothing to do with Inkjet printers. Inkjet printers absolutely can't work properly with CMYK...
-
Philip Cruse hat einen Kommentar hinterlassen
I know that this post is a few weeks old now, but I've just moved my C1Pro to a new Mac, which has Mojave, and found similar problems, which I was able to fix, I hope 😊 Steve Jump made some very go...
-
Philip Cruse hat einen Kommentar hinterlassen
Hi,Strange that Airprint is working, as known to be buggy.Some problems with Mojave reported, supposedly due to 16-bit printing being selected in the driver. I wasn't able to reproduce it on my SP3...
-
Philip Cruse hat einen Kommentar hinterlassen
[quote="tenmangu81" wrote: [quote="ColourPhil" wrote: Hi Robert,For your information, I have a NEC hardware calibrated, with a 85 cd/m2 luminance, I use soft-proofing in both C1 and PS (and the...
-
Philip Cruse hat einen Post erstellt
Soft Proofing
I'm a new user, and have been trying to advise someone else about soft proofing on another thread, under my old user name. However, it occurs to me that while I know a lot about Colour Management i...