How to fix the problem «The camera could not be attached. The Sony ILCE-7M4 is currently busy/rejected the connection» with wireless tethering in Capture One 23
Hello! Here's the manual how to fix the problem «The camera could not be attached. The Sony ILCE-7M4 is currently busy/rejected the connection» with wireless tethering in Capture One 23.
• At first you need to connect to your Wi-Fi access point (shared from your phone or it's studio's Wi-Fi - no matter)
Go to Menu ----->> Network ----->> Wi-Fi ----->> Wi-Fi Connect - «On»
After you go to line with «Access Point Set. » and choose your access point, enter password and etc. If the is «On» you need to do this:
Go to Menu ----->> Network ----->> Cnct./PC Remote ----->> PC Remote function ----->> PC Remote - «Off».
Then to Menu ----->> Network ----->> Network Option ----->> Access Authen. Settings - «Off». This disables the protection that prevents you from connecting the camera to the PC.
Again Menu ----->> Network ----->> Cnct./PC Remote ----->> PC Remote function ----->> PC Remote - «On».
Here's you need to make a pair between your camera and PC. Click on «Pairing» and choose our camera in «Tethering» tab in Capture One. Camera will offer to pair - click «Yes». Done! Now you can tether your camera without cables!
P.S. Guess you can do this with other cameras. All you need to do is simply turn off the protection that makes your connection secure with encryption. Find similar names in menu choice and hope everything will work :D
-
SUPER CLUTCH!
Thanks for sharing, the last step I'd advise was big- you must be on the pairing screen on your a7iv for that "do you want to pair?" pop up message to show up.Thank you!
0 -
This is what worked for me too! Was bashing my head trying to fix this Code 11 issue with my A7IV. Thanks so much!
0
Post is closed for comments.
Comments
2 comments