Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Problem Tethering with Fuji GFX 100

Roberto Gobbo

I ran into an issue with my Fuji GFX-100 (December 2022) used in tethering mode. After a short period of use, I can no longer change the aperture using the CaptureOne 23 software and I have to intervene directly on the camera ring or remove and replace the 4.5 m TheterPro cable which I use. I often have to remove the battery pack to turn it off and restart it several times as it locks up. Connection drops continuously and I have to disconnect and reconnect the device. From a check with the Fuji professional assistance center we found that it is a software problem and the problem is not resolved even with the latest version. Works perfectly with Fuji X acquire and Lightroom.

0

Comments

1 comment

Date Votes
  • Łukasz Gałecki

    I had similar problem with GFX 50s. Solution was to use a USB cable with repeater. I also found that tether tools cables were the worst I ever used. Very unreliable. Now I use no name 1m cable and 3m extender with repeater and no problems so far for last year. With tether tools 4,5m cable I had exactly the same issues like you have.

    0

Post is closed for comments.