Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Nikon Z

Permanently deleted user
Do you plan to include raw support for these cameras in v11 or you will put it in v12 so everybody who purchase the cameras need to upgrade?
0

Comments

10 comments

Date Votes
  • John Doe
    NNN636372919529824193 wrote:
    Do you plan to include raw support for these cameras in v11 or you will put it in v12 so everybody who purchase the cameras need to upgrade?

    You should ask support directly via the link in my signature, they need it to evaluate the level of demand.
    0
  • Permanently deleted user
    Thanks for the link, however, i wanted to ask via public post 😊
    0
  • Ian Wilson
    Moderator
    Top Commenter
    NNN636372919529824193 wrote:
    Thanks for the link, however, i wanted to ask via public post 😊

    Yes, but we are just your fellow users, so we cannot provide an answer. And remember that the cameras are not on sale yet!

    Ian
    0
  • cdc
    NNN636372919529824193 wrote:
    Do you plan to include raw support for these cameras in v11 or you will put it in v12 so everybody who purchase the cameras need to upgrade?


    I heard that v12 will come with the files to 3D print your own Nikon Z.
    0
  • Ian Wilson
    Moderator
    Top Commenter
    😂
    0
  • SFA
    cdc wrote:
    NNN636372919529824193 wrote:
    Do you plan to include raw support for these cameras in v11 or you will put it in v12 so everybody who purchase the cameras need to upgrade?


    I heard that v12 will come with the files to 3D print your own Nikon Z.


    But only the Mk2 version ... 😉
    0
  • Permanently deleted user
    I would like to have your mood for fun guys.
    The truth is that i like capture one but i have been very unlucky from cost perspective.
    I purchased 30,5 days before new version was released, so i had to upgrade and now if they include it into v12 i have to upgrade again. If you count, i will be on 580€ for one year of usage c1...
    0
  • SFA
    NNN636372919529824193 wrote:
    I would like to have your mood for fun guys.
    The truth is that i like capture one but i have been very unlucky from cost perspective.
    I purchased 30,5 days before new version was released, so i had to upgrade and now if they include it into v12 i have to upgrade again. If you count, i will be on 580€ for one year of usage c1...


    Do you need to buy a Nikon Z?

    You were certainly unlucky with the timing last time but there was no way for anyone to know that would be the case.

    On the plus side at least the upgrades are, usually, quite reasonably priced and optional UNLESS the release timing and availability of the third party products for which we desire support does not coincide well.


    Grant
    0
  • Permanently deleted user
    PhaseOne does not like to announce development. Usually when supported, it's out.

    Nonetheless, from a bit of research you can find that cameras with reasonable amount of interest become supported within an average of 3 months from the camera's public release. (Sony's seem to come earlier since they have some sort of partnership)

    That could mean indeed, that you may not see Nikon Z support until version 12.
    0
  • Permanently deleted user
    ok, thx for your opinions guys
    0

Post is closed for comments.