Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

problem with lcc and dust removal

Ronald Tilleman
When I create an lcc from a reference file, I'll get the popscreen asking me if I want include dust removal information and Wide angel lens with movements. I try to check the boxes, see something appear very shortly, but it doesn't stay checked. So the lcc doesn't have the dust removal information. I'm on C1 7.01 and on a win 7 64b computer. Who has suggestions how tot solve this? Ant help is much appreciated 😄
0

Comments

6 comments

Date Votes
  • Permanently deleted user
    My computer runs under Windows 7 Ultimate 64 bits. C1 7.02 is running. I have performed a only two LCC procedures with good result (LCC label attached to neutral pictures in the explorer), When I wanted to complete that collection of LCC´s for my Zeiss F2.8/21mm, for every diafragm one LCC, no labels appeared and the information was lost. Applying an LCC for a specific diafragm wasn´t possible.

    So I can´t really answer to your problem, only confirm that I´ve got something similar.
    0
  • Paul Steunebrink
    Update to 7.0.2 first, and tell us what happens then.
    0
  • Piet Gispen
    I am having the same problem Ronald is having. I am working on Windows 7 with 8 Gb memory and CO version 7.0.2. The problem also occurred with version 7.0.1. Except for dust removal and movements, the LCC seems to be working alright, which was not always the case with version 7.0.1.

    Piet Gispen
    http://www.pietgispen.com
    0
  • Permanently deleted user
    update to version 7.02 didn´t solve the problem. So, please, advise what to do.
    0
  • Paul2
    I too am having this on C1 7.1, with the LCC *not* including dust removal information. The box is checked, but it does not remove dust.

    It seems to be a bug in the Windows release of 7 as many people here are suffering from it. Can you advise please, and make it a priority, its a real pain to have to go back and remake all LCC corrections when this is fixed.

    Also, for what its worth, the LCC engine is not using all the Intel cores. It is pretty slow compared to Mac version from what I see online. Its fast enough for other tasks, but generating LCCs are pretty slow. Seems to just use a single core/thread.

    Windows 7 Pro, 24Gb RAM, i7 processor.
    0
  • Piet Gispen
    I have been having exactly the same problem in all 7xx versions of CO, including the latest 7.1.1 (windows 7 64bit 8 Gb RAM etc)

    Piet Gispen
    http://www.pietgispen.com
    0

Post is closed for comments.