Previews in 3.7.8 not fitting window

Comments

16 comments

  • bokeron
    Same here for D300 nefs.

    Curiously, D200 nefs are not affected.
    0
    Comment actions Permalink
  • Paul Steunebrink
    I don't have D300 NEFs but I do have 1Ds III CR2s and I noticed the same behavior. This is my explanation:

    CO3.x uses for the preview a certain resolution, which is 25% of the raw file resolution most of the time. For a low res camera (to current standards) like the EOS-1D (4 megapix) the preview resolution is 50% of the raw resolution and for a high res camera like the 1Ds III it appears to be only 12% of the raw resolution. You can check this yourself in the upper right corner where you read two percentage values (preview and raw resolution resp.).

    The preview setting 'best fit' will adapt the preview size to the screen size available with a maximum of 100% preview resolution. On a large screen this will occur often, on a smaller screen only when you maximize the preview (F9). A larger preview is possible by hand (slider) but appears pixelated until you reach 100% raw resolution (which is often 400% preview resolution in a 1:4 ratio). Here the preview is recalculated, slowing down your workflow.

    For some reason, unknown to me, Phase One has chosen a 1:8 ratio for the 1Ds III preview resolution. This results in a rather small preview at 100% (preview resolution) of only 700 pixels wide. For comparison, the Phase One P25 back with approx. the same resolution as the 1Ds III has a 1:4 ratio for the preview resolution.

    Don't know what the preview resolution ratio is for the Nikon D300 and D3.

    Maybe PO support reacts on this. If not, create a support case.
    0
    Comment actions Permalink
  • Martin312
    Paul

    That sounds plausible. I will try and check it out when I get back this evening.

    It could also explain my shrinking previews (from several camras inc EOS1Ds1) after crop/rotate if it took account of the resizing I was doing?

    I raised a support case at the same time as my post here. They have come back for more info which I will send tonight with your suggestion.
    0
    Comment actions Permalink
  • Paul Steunebrink
    Just ran some tests on CO 3.7.8 for another thread and discovered that the EOS-1Ds (first version) also has the 1:8 preview ratio now resulting in a very small preview. Silly.
    The 1Ds Mk II is still in a 1:4 ratio, although the program suggests a 1:8 ratio in the top right corner. Things are getting messed up a bit in CO 3.x unfortunately.

    I don't understand your shrinking issue. The preview should not shrink but due to rotation, a crop appears and is smaller than the full size image for obvious reasons.
    0
    Comment actions Permalink
  • Bryan2
    The smaller previews are unacceptable to me. It's enough to have me reject this program and choose something else. So discouraging to have waited this long for an update and to struggle with this.
    0
    Comment actions Permalink
  • Paul Steunebrink
    Update on my previous post on preview to raw ratio in CO 3.7.8 after I acquired the NEF files.

    Nikon D3 (FX) is 1:8
    Nikon D3 (DX) is 1:4
    Nikon D300 is 1:8

    I think it should be 1:4 for all these models.
    0
    Comment actions Permalink
  • paulcoxphotography
    Amazed this has been up since Feb and no response. Very disappointing that my favourite RAW converter is basically unusable with my new camera (the white balance is wrong too). Will try Capture 4 I guess or continue to use NX ☹️
    0
    Comment actions Permalink
  • paulcoxphotography
    [quote="paulcoxphotography" wrote:
    Amazed this has been up since Feb and no response. Very disappointing that my favourite RAW converter is basically unusable with my new camera (the white balance is wrong too). Will try Capture 4 I guess or continue to use NX ☹️


    and I can't create a support request as that's not working either. Great!
    0
    Comment actions Permalink
  • nikon_vienna
    Totally agree with you, even my dealer has to deal with heavy requests from D300-Users and is not able to give any information,
    till when this problem will be solved. ☹️
    Maybe a moderator could help and give us an outllook.
    Meantime I'm working now with NX and Lightroom and getting more and more familiar with these solutions.... 😎

    thx
    Gerhard
    0
    Comment actions Permalink
  • paulcoxphotography
    In a new twist it seems that now when I open the files on my PC (having made changes to them in NX) they are no longer correctly rotated all all the previous settings are lost. I also cannot PM anyone about this as that facility is disabled.
    0
    Comment actions Permalink
  • Paul Steunebrink
    [quote="paulcoxphotography" wrote:
    In a new twist it seems that now when I open the files on my PC (having made changes to them in NX) they are no longer correctly rotated all all the previous settings are lost. I also cannot PM anyone about this as that facility is disabled.

    Though not a NX user myself, I know that NX writes to NEF, making it incompatible with other 3rd party raw developers. Don't have details, but in general, go NX all the way or stick with 3rd party developers like Capture One. Have you tried CO4 already?
    0
    Comment actions Permalink
  • paulcoxphotography
    [quote="Paul Steunebrink" wrote:
    [quote="paulcoxphotography" wrote:
    In a new twist it seems that now when I open the files on my PC (having made changes to them in NX) they are no longer correctly rotated all all the previous settings are lost. I also cannot PM anyone about this as that facility is disabled.

    Though not a NX user myself, I know that NX writes to NEF, making it incompatible with other 3rd party raw developers. Don't have details, but in general, go NX all the way or stick with 3rd party developers like Capture One. Have you tried CO4 already?


    I'm going to give C1 4 a go now. Took my a while to jump through all the activation hoops and then download the latest version of the software. Prefer V3 though!
    0
    Comment actions Permalink
  • John2
    Thought I'd jump in to resurrect this in the hope that someone from the C4 programming team might take a little time out to sort this digicam preview issue in 3.7.x

    Much as C4 looks like a promising new kid on the block, I still prefer C1's speed of use in my professional workflow and still find myself all thumbs with C4 despite my best efforts to get to grips with the worst of the programming shortcomings (such as previews not being updated until you scroll them into view - doh!) and am bemused that PhaseOne do seem to be blackmailing us into using C4, even though it is still realistically in beta.

    I'm a P45+ user, but PhaseOne can't seriously think that this is the only weapon I'll use day to day. 90% of my work is done (by volume) on the D3 and the fact that I (& some Canon users according to this forum) am trying to select images from previews that may as well be from a phone cam is simply not acceptable.

    Teamwork in London and I'm sure the other dealers are great PhaseOne ambassadors, and most PhaseOne users are a loyal lot, but the silence from Denmark about this is certainly driving me away to consider competing products. I'll still use 3.7.8 whilst I can, but unless this is sorted soon I'll have to move on.

    £20k for the P45+ with a preview screen worse than a £300 digicam and proprietary software that won't work with my other capture devices because programming time is not being spent on porting useful updates from the beta v4 (lovely with the D3) to the current pro software smacks of a company that has lost its way....

    Anyone speak Danish?

    end of rant....
    0
    Comment actions Permalink
  • Jon
    Thought we had posted the answer to this problem in another thread, but It must have been a support case... sorry about that, could have cleared this up a while ago.

    The problem stem from the fundamental preview generation code in 3.7.x. Basically Capture One 3.7 uses a simple algorithm based on the pixel dimensions of the raw file. depending on what the numbers are it can result in a larger preview, like the D200, or in some cases a rather small one like with the D3. Most cameras were fine in 3.7 but because we have seen the downside of the algorithm an all new method has been introduced for Capture One 4 so you will not see this issue there. Because it is such a fundamental part of the 3.7 code, the fix for it takes a substantial amount of time. As this would push Capture One 4 Pro back further, it will not be done.
    0
    Comment actions Permalink
  • Martin312
    As the original poster - thank you, at last!

    However whilst I am broadly happy with 3.7.8 with my existing cameras I am looking at alternatives something I wasn't interested in doing a year ago. From what I have seen of C1 v4 there will need to be some significant changes for the Pro version if it is going to work for me.

    Unfortunately no single RAW converter I have tried meets my needs as well as 3.7.8 but some I consider to better than the existing v4.1.

    Mind you I would love the lens correction capability that Canon DPP offers and would switch to it tomorrow if it supported IPTC data input in a usable way especially with a hierarchical controlled keyword vocabulary that fully supported synonyms etc..
    0
    Comment actions Permalink
  • Ken101
    Frankly i dont like much Capture 4 version compare to 3.x Series lot more to work with in 4.0 compare to 3.x version , I am using D300 & D3 its 1.8 ratio aspect as mentioned like above mentioned post , its so furstrating , if i have to use version 4.0 i better pick Adobe Light room to waste less time then Capture 4.0 ,


    I wish Phase one bring some patch or update to version 3.x.
    0
    Comment actions Permalink

Please sign in to leave a comment.