Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Mazing / Pixel Artifacts 9.03 - Phase One XF IQ180 55mm LS

Quincy Dein
strange mazing artifacts.. IQ180, XF, 55mm LS...

Capture One 9.03

What is causing this? Lens issue? Capture One issue?

http://s10.postimg.org/jr19h1upl/Screen_Shot_2016_01_19_at_10_55_27_PM.png

http://s30.postimg.org/mu8vnarep/Screen_Shot_2016_01_19_at_10_56_35_PM.png

http://s24.postimg.org/m5hz5qtvp/Screen_Shot_2016_01_19_at_10_56_29_PM.png
0

Comments

6 comments

Date Votes
  • SFA
    Probably a good idea to create a Support Case for this.


    Grant
    0
  • Jim_DK
    This is caused by excessive IR (because of the flare probably). Contact support for a solution.
    0
  • Quincy Dein
    This appears to much worse in C1 than Camera Raw:


    http://s15.postimg.org/i6chyjj8r/Screen_Shot_2016_01_20_at_7_27_14_AM.png

    My Canon and Nikon gear would never show these issues when shooting backlit into the sunset?!

    I would not expect a $40K camera to not be able to shoot sunset lifestyle?
    0
  • Quincy Dein
    More examples with 100% view and full image view to show context...

    So far response from support was to "change composition or use another lens" Totally unacceptable for this $40k camera system.

    http://s22.postimg.org/mmc1t2mwx/Screen_Shot_2016_01_20_at_10_40_17_AM.png

    http://s15.postimg.org/opfht8kkr/Screen_Shot_2016_01_20_at_10_41_56_AM.png

    http://s2.postimg.org/dmvv9mcg9/Screen_Shot_2016_01_20_at_10_42_18_AM.png
    0
  • NNN635158767546269381
    Hello,

    we are using an IQ160 and never had such issue. Could it be just a problem in the display? Did you try to actually export the file ?

    Eventually, could you provide me the RAW file?

    Yep, unacceptable. Especially, if it works with the ACR. Contact them again!

    Take care

    [quote="QDPHOTO" wrote:
    More examples with 100% view and full image view to show context...

    So far response from support was to "change composition or use another lens" Totally unacceptable for this $40k camera system.
    0
  • Jim_DK
    Can you provide your case number?
    0

Post is closed for comments.