C1 Support for CWB on 1dsm2
Upon pulling an orange flower image into C1 the WB went nuts. I shot image using custom white balance on my 1ds Mark 2 (used expo disc for setting) When I pulled inmage into C1 the colors were way off. I tried to cycle through all of C1's WB's but all were off.
I have 40 images that will all have to be hand tweaked unless someone has some help to offer. I basically had to add alomst 3000 degrees of temp as well as plus 25 on the tint slider just to get things close. Still not as exact as image on my monitor pulled up in I view-media pro.
Have I missed something or will the C1 not support custom white balance on my new camera. Thanks in advance for any help.
I have 40 images that will all have to be hand tweaked unless someone has some help to offer. I basically had to add alomst 3000 degrees of temp as well as plus 25 on the tint slider just to get things close. Still not as exact as image on my monitor pulled up in I view-media pro.
Have I missed something or will the C1 not support custom white balance on my new camera. Thanks in advance for any help.
0
-
Kent,
When using an in-camera custom WB setting, the Capture One WB setting pull-down box shows As Shot
Sounds like you tried this, but make sure this is selected and check results.
See Tips&Tricks article:
http://www.phaseone.com/Content/Softwar ... lance.aspx
Sincerely,
k c0
Post is closed for comments.
Comments
1 comment